Klipper-Ultimaker2-Dual/test.cfg at main · Bastler1971/Klipper-Ultimaker2-Dual · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
#######################################
# Move test
#######################################

[gcode_macro MOVE_TEST]
description: use: MOVE_TEST F=300
#use: MOVE_TEST F=300
gcode:
  {% set speed = params.F|default(100)|float %} ; speed in mm/s
  {% set x_max = printer.toolhead.axis_maximum.x|float - 5 %}
  {% set y_max = printer.toolhead.axis_maximum.y|float - 5 %}
  {% set x_min = printer.toolhead.axis_minimum.x|float + 5 %}
  {% set y_min = printer.toolhead.axis_minimum.y|float + 5 %}
  # home if needed
  {% if "Printing" not in printer.idle_timeout.state %}
    {% if "xyz" not in printer.toolhead.homed_axes %}
      G28
    {% endif %}
    SAVE_GCODE_STATE NAME=STATE_MOVE_TEST
    #move to start
    G90
    #G0 Z50 F600
    G0 X{x_min} Y{y_min} F{speed*60}
    G0 X{x_min} Y{y_max} F{speed*60}
    G0 X{x_max} Y{y_min} F{speed*60}
    G0 X{x_min} Y{y_min} F{speed*60}
    G0 X{x_max} Y{y_max} F{speed*60}
    G0 X{x_max} Y{y_min} F{speed*60}
    G0 X{x_min} Y{y_max} F{speed*60}
    G0 X{x_max} Y{y_max} F{speed*60}
    G0 X{x_min} Y{y_min} F{speed*60}
    G0 X{x_min} Y{y_max} F{speed*60}
    RESTORE_GCODE_STATE NAME=STATE_MOVE_TEST
  {% else %}
    {action_respond_info("Not possible during printing!")}
  {% endif %}


[gcode_macro MOVE_TEST_MAX]
description: Vorsicht - maximaler Vorschub nur unter Aenderung printer.cfg
#use: max_velocity: 800 und max_accel: 4800 in printer.cfg aendern fuer maximale Werte
gcode:
  {% set speed = params.F|default(800)|float %} ; speed in mm/s
  {% set x_max = printer.toolhead.axis_maximum.x|float - 5 %}
  {% set y_max = printer.toolhead.axis_maximum.y|float - 5 %}
  {% set x_min = printer.toolhead.axis_minimum.x|float + 5 %}
  {% set y_min = printer.toolhead.axis_minimum.y|float + 5 %}
  # home if needed
  {% if "Printing" not in printer.idle_timeout.state %}
    {% if "xyz" not in printer.toolhead.homed_axes %}
      G28
    {% endif %}
    SAVE_GCODE_STATE NAME=STATE_MOVE_TEST
    #move to start
    G90
    #G0 Z50 F600
    G0 X{x_min} Y{y_min} F{speed*60}
    G0 X{x_min} Y{y_max} F{speed*60}
    G0 X{x_max} Y{y_min} F{speed*60}
    G0 X{x_min} Y{y_min} F{speed*60}
    G0 X{x_max} Y{y_max} F{speed*60}
    G0 X{x_max} Y{y_min} F{speed*60}
    G0 X{x_min} Y{y_max} F{speed*60}
    G0 X{x_max} Y{y_max} F{speed*60}
    G0 X{x_min} Y{y_min} F{speed*60}
    G0 X{x_min} Y{y_max} F{speed*60}
    RESTORE_GCODE_STATE NAME=STATE_MOVE_TEST
  {% else %}
    {action_respond_info("Not possible during printing!")}
  {% endif %}


[gcode_macro DUMP_PARAMETERS]
description: Debug: Print all entries of the printer object
gcode:
  {% set parameters = namespace(output = '') %}
  {% for name1 in printer %}
    {% for name2 in printer[name1] %}
      {% set donotwant = ['configfile'] %}
      {% if name1 is not in donotwant %}
        {% set param = "printer['%s'].%s = %s" % (name1, name2, printer[name1][name2]) %}
        {% set parameters.output = parameters.output +  param + "\n" %}
      {% endif %}
    {% endfor %}
  {% endfor %}
  {action_respond_info(parameters.output)}


#[gcode_macro QUERY_BME280]
#gcode:
 #   {% set sensor = printer['bme280 enclosure_fan'] %}
 #   {action_respond_info(
 #       "Temperature: %.2f C\n"
 #       "Pressure: %.2f hPa\n"
 #       "Humidity: %.2f%%" % (
 #           sensor.temperature,
 #           sensor.pressure,
 #           sensor.humidity))}