A fidget toy that has two printed clicky switches and a set of smooth rolling gears that uses VORON BOM hardware to assemble.
Credit for original spring mechanism idea goes to @kriswillcode.
License for the files in this directory are under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.
- (4) M3x12 SHCS
- Material: ABS or PLA
- Layer height: 0.2mm
- Extrusion width: 0.4mm
- Infill percentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
Refer to included manual, or:
- Install click springs into slots on case bottom
- Install rocker switch and click switch on posts on case bottom ends
- Install gears on center posts of case bottom
- Apply case top over bottom case/components
- Secure with 4 M3x12 SHCS, threaded into plastic. Gently!