tools: replace _ with - in idf.py

Closes espressif#5126

Author: mfialaf

.gitlab/ci/host-test.yml

@@ -208,7 +208,7 @@ test_idf_tools:
   script:
     - cd ${IDF_PATH}/components/efuse/
     - ./efuse_table_gen.py -t "${IDF_TARGET}" ${IDF_PATH}/components/efuse/${IDF_TARGET}/esp_efuse_table.csv
-    - git diff --exit-code -- ${IDF_TARGET}/esp_efuse_table.c || { echo 'Differences found for ${IDF_TARGET} target. Please run make efuse_common_table or idf.py efuse_common_table and commit the changes.'; exit 1; }
+    - git diff --exit-code -- ${IDF_TARGET}/esp_efuse_table.c || { echo 'Differences found for ${IDF_TARGET} target. Please run make efuse_common_table or idf.py efuse-common-table and commit the changes.'; exit 1; }
     - cd ${IDF_PATH}/components/efuse/test_efuse_host
     - ./efuse_tests.py
 

README.md

@@ -103,9 +103,9 @@ After the initial flash, you may just want to build and flash just your app, not
 
 ## Erasing Flash
 
-The `idf.py flash` target does not erase the entire flash contents. However it is sometimes useful to set the device back to a totally erased state, particularly when making partition table changes or OTA app updates. To erase the entire flash, run `idf.py erase_flash`.
+The `idf.py flash` target does not erase the entire flash contents. However it is sometimes useful to set the device back to a totally erased state, particularly when making partition table changes or OTA app updates. To erase the entire flash, run `idf.py erase-flash`.
 
-This can be combined with other targets, ie `idf.py -p PORT erase_flash flash` will erase everything and then re-flash the new app, bootloader and partition table.
+This can be combined with other targets, ie `idf.py -p PORT erase-flash flash` will erase everything and then re-flash the new app, bootloader and partition table.
 
 # Resources
 

README_CN.md

@@ -56,7 +56,7 @@ ESP-IDF 中的子模块采用相对路径（[详见 .gitmodules 文件](.gitmodu
 * 在主机中安装入门指南中提到的构建所依赖的工具。
 * 运行安装脚本来设置构建环境。可为 Windows shell 选择 `install.bat` 或 `install.ps1`，为 Unix shell 选择 `install.sh` 和 `install.fish`。
 * 在使用 ESP-IDF 之前，需要在 shell 中运行导出脚本。Windows 下可运行 `export.bat`，Unix 下可运行 `source export.sh`。
-  
+
 ## 配置项目
 
 * `idf.py set-target <chip_name>` 可将项目的目标芯片设置为 `<chip_name>`。运行 `idf.py set-target`，不用带任何参数，可查看所有支持的目标芯片列表。
@@ -103,9 +103,9 @@ ESP-IDF 中的子模块采用相对路径（[详见 .gitmodules 文件](.gitmodu
 
 ## 擦除 Flash
 
-`idf.py flash` 并不会擦除 flash 上所有的内容，但是有时候我们需要设备恢复到完全擦除的状态，尤其是分区表发生了变化或者 OTA 应用升级时。要擦除整块 flash 请运行 `idf.py erase_flash`。
+`idf.py flash` 并不会擦除 flash 上所有的内容，但是有时候我们需要设备恢复到完全擦除的状态，尤其是分区表发生了变化或者 OTA 应用升级时。要擦除整块 flash 请运行 `idf.py erase-flash`。
 
-这条命令还可以和其余命令整合在一起，`idf.py -p PORT erase_flash flash` 会擦除一切然后重新烧写新的应用程序、引导程序和分区表。
+这条命令还可以和其余命令整合在一起，`idf.py -p PORT erase-flash flash` 会擦除一切然后重新烧写新的应用程序、引导程序和分区表。
 
 # 其它参考资源
 

components/app_update/CMakeLists.txt

@@ -55,7 +55,7 @@ if(NOT BOOTLOADER_BUILD)
                          "--partition-table-offset;${PARTITION_TABLE_OFFSET}")
         idf_component_get_property(esptool_py_dir esptool_py COMPONENT_DIR)
 
-        add_custom_target(read_otadata DEPENDS "${PARTITION_CSV_PATH}"
+        add_custom_target(read-otadata DEPENDS "${PARTITION_CSV_PATH}"
             COMMAND ${CMAKE_COMMAND}
             -D IDF_PATH="${idf_path}"
             -D SERIAL_TOOL="${otatool_py}"
@@ -65,8 +65,9 @@ if(NOT BOOTLOADER_BUILD)
             WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}
             USES_TERMINAL
             )
+        add_deprecated_target_alias(read_otadata read-otadata)
 
-        add_custom_target(erase_otadata DEPENDS "${PARTITION_CSV_PATH}"
+        add_custom_target(erase-otadata DEPENDS "${PARTITION_CSV_PATH}"
             COMMAND ${CMAKE_COMMAND}
             -D IDF_PATH="${idf_path}"
             -D SERIAL_TOOL="${otatool_py}"
@@ -76,6 +77,7 @@ if(NOT BOOTLOADER_BUILD)
             WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}
             USES_TERMINAL
             )
+        add_deprecated_target_alias(erase_otadata erase-otadata)
 
         idf_component_get_property(main_args esptool_py FLASH_ARGS)
         idf_component_get_property(sub_args esptool_py FLASH_SUB_ARGS)

components/efuse/CMakeLists.txt

@@ -39,9 +39,10 @@ idf_build_get_property(python PYTHON)
 # Make common files esp_efuse_table.c and include/esp_efuse_table.h files.
 set(EFUSE_COMMON_TABLE_CSV_PATH "${COMPONENT_DIR}/${target}/esp_efuse_table.csv")
 
-add_custom_target(efuse_common_table COMMAND "${python}"
+add_custom_target(efuse-common-table COMMAND "${python}"
                  "${CMAKE_CURRENT_SOURCE_DIR}/efuse_table_gen.py"
                  ${EFUSE_COMMON_TABLE_CSV_PATH} ${GEN_EFUSE_TABLE_ARG})
+add_deprecated_target_alias(efuse_common_table efuse-common-table)
 
 ###################
 # Make custom files project/main/esp_efuse_custom_table.c and project/main/include/esp_efuse_custom_table.h files.
@@ -51,15 +52,18 @@ if(${CONFIG_EFUSE_CUSTOM_TABLE})
     idf_build_get_property(project_dir PROJECT_DIR)
     get_filename_component(EFUSE_CUSTOM_TABLE_CSV_PATH "${CONFIG_EFUSE_CUSTOM_TABLE_FILENAME}"
                            ABSOLUTE BASE_DIR "${project_dir}")
-    add_custom_target(efuse_custom_table COMMAND "${python}" "${CMAKE_CURRENT_SOURCE_DIR}/efuse_table_gen.py"
+    add_custom_target(efuse-custom-table COMMAND "${python}" "${CMAKE_CURRENT_SOURCE_DIR}/efuse_table_gen.py"
                            ${EFUSE_COMMON_TABLE_CSV_PATH} ${EFUSE_CUSTOM_TABLE_CSV_PATH} ${GEN_EFUSE_TABLE_ARG})
+    add_deprecated_target_alias(efuse_custom_table efuse-custom-table)
 else()
-    add_custom_target(efuse_custom_table COMMAND)
+    add_custom_target(efuse-custom-table COMMAND)
+    add_deprecated_target_alias(efuse_custom_table efuse-custom-table)
 endif()#if(${CONFIG_EFUSE_CUSTOM_TABLE})
 
-add_custom_target(show_efuse_table COMMAND "${python}"
+add_custom_target(show-efuse-table COMMAND "${python}"
                   "${CMAKE_CURRENT_SOURCE_DIR}/efuse_table_gen.py"
                   ${EFUSE_COMMON_TABLE_CSV_PATH} ${EFUSE_CUSTOM_TABLE_CSV_PATH} ${GEN_EFUSE_TABLE_ARG} "--info")
+add_deprecated_target_alias(show_efuse_table show-efuse-table)
 
 ###################
 # Generates files for unit test. This command is run manually.

components/efuse/esp32/esp_efuse_table.csv

@@ -6,7 +6,7 @@
 ##########################################################################
 # *) The value MAX_BLK_LEN depends on CONFIG_EFUSE_MAX_BLK_LEN, will be replaced with "None" - 256. "3/4" - 192. "REPEAT" - 128.
 # !!!!!!!!!!! #
-# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse_common_table"
+# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse-common-table"
 # this will generate new source files, next rebuild all the sources.
 # !!!!!!!!!!! #
 

components/efuse/esp32c3/esp_efuse_table.csv

@@ -6,7 +6,7 @@
 ##########################################################################
 # *) The value MAX_BLK_LEN depends on CONFIG_EFUSE_MAX_BLK_LEN, will be replaced with "None" - 256. "3/4" - 192. "REPEAT" - 128.
 # !!!!!!!!!!! #
-# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse_common_table"
+# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse-common-table"
 # this will generate new source files, next rebuild all the sources.
 # !!!!!!!!!!! #
 

components/efuse/esp32h2/esp_efuse_table.csv

@@ -6,7 +6,7 @@
 ##########################################################################
 # *) The value MAX_BLK_LEN depends on CONFIG_EFUSE_MAX_BLK_LEN, will be replaced with "None" - 256. "3/4" - 192. "REPEAT" - 128.
 # !!!!!!!!!!! #
-# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse_common_table"
+# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse-common-table"
 # this will generate new source files, next rebuild all the sources.
 # !!!!!!!!!!! #
 

components/efuse/esp32s2/esp_efuse_table.csv

@@ -6,7 +6,7 @@
 ##########################################################################
 # *) The value MAX_BLK_LEN depends on CONFIG_EFUSE_MAX_BLK_LEN, will be replaced with "None" - 256. "3/4" - 192. "REPEAT" - 128.
 # !!!!!!!!!!! #
-# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse_common_table"
+# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse-common-table"
 # this will generate new source files, next rebuild all the sources.
 # !!!!!!!!!!! #
 

components/efuse/esp32s3/esp_efuse_table.csv

@@ -5,7 +5,7 @@
 #                   |     EFUSE_BLK10)|            |            |        #
 ##########################################################################
 # !!!!!!!!!!! #
-# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse_common_table"
+# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse-common-table"
 # this will generate new source files, next rebuild all the sources.
 # !!!!!!!!!!! #