block: use the passed in @bdev when claiming if partno is zero

6b4517a (block: implement bd_claiming and claiming block)
introduced claiming block to support O_EXCL blkdev opens properly.

bd_start_claiming() looks up the part 0 bdev and starts claiming
block.  The function assumed that there is only one part 0 bdev and
always used bdget_disk(disk, 0) to look it up; unfortunately, this
isn't true for some drivers (floppy) which use multiple block devices
to denote different operating parameters for the same physical device.
There can be multiple part 0 bdev's for the same device number.

This incorrect assumption caused the wrong bdev to be used during
claiming leading to unbalanced bd_holders as reported in the following
bug.

  https://bugzilla.kernel.org/show_bug.cgi?id=28522

This patch updates bd_start_claiming() such that it uses the bdev
specified as argument if its partno is zero.

Note that this means that different bdev's can be used for the same
device and O_EXCL check can be effectively bypassed.  It has always
been broken that way and floppy is fortunately on its way out.  Leave
that breakage alone.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec>
Tested-by: Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec>
Cc: stable@kernel.org	# >= v2.6.36
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Author: htejun

fs/block_dev.c

@@ -762,7 +762,19 @@ static struct block_device *bd_start_claiming(struct block_device *bdev,
 	if (!disk)
 		return ERR_PTR(-ENXIO);
 
-	whole = bdget_disk(disk, 0);
+	/*
+	 * Normally, @bdev should equal what's returned from bdget_disk()
+	 * if partno is 0; however, some drivers (floppy) use multiple
+	 * bdev's for the same physical device and @bdev may be one of the
+	 * aliases.  Keep @bdev if partno is 0.  This means claimer
+	 * tracking is broken for those devices but it has always been that
+	 * way.
+	 */
+	if (partno)
+		whole = bdget_disk(disk, 0);
+	else
+		whole = bdgrab(bdev);
+
 	module_put(disk->fops->owner);
 	put_disk(disk);
 	if (!whole)