pulp-os.rst

PULP OS

Configuration:	:ref:`projectconf_env_framework` = pulp-os

PULP is a silicon-proven Parallel Ultra Low Power platform targeting high energy efficiencies. The platform is organized in clusters of RISC-V cores that share a tightly-coupled data memory.

For more detailed information please visit vendor site.

Contents

• Debugging
• Examples
• Platforms
• Boards

Debugging

:ref:`piodebug` - "1-click" solution for debugging with a zero configuration.

• Tools & Debug Probes
  • On-Board Debug Tools

Tools & Debug Probes

Supported debugging tools are listed in "Debug" column. For more detailed information, please scroll table by horizontal. You can switch between debugging :ref:`debugging_tools` using :ref:`projectconf_debug_tool` option in :ref:`projectconf`.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions.

On-Board Debug Tools

Boards listed below have on-board debug probe and ARE READY for debugging! You do not need to use/buy external debug probe.

Name	Platform	MCU	Frequency	Flash	RAM
:ref:`board_riscv_gap_gapuino`	:ref:`platform_riscv_gap`	GAP8	250MHz	64MB	8MB

Examples

• PULP OS for RISC-V GAP

Platforms

Name	Description
:ref:`platform_riscv_gap`	GreenWaves GAP8 IoT application processor enables the cost-effective development, deployment and autonomous operation of intelligent sensing devices that capture, analyze, classify and act on the fusion of rich data sources such as images, sounds or vibrations.

Boards

Note

• You can list pre-configured boards by :ref:`cmd_boards` command or PlatformIO Boards Explorer
• For more detailed board information please scroll the tables below by horizontally.

GreenWaves Technologies

Name	Platform	Debug	MCU	Frequency	Flash	RAM
:ref:`board_riscv_gap_gapuino`	:ref:`platform_riscv_gap`	On-board	GAP8	250MHz	64MB	8MB