diff --git a/products/magic-wan/src/content/get-started/configure-tunnels/assign-tunnel-priorities.md b/products/magic-wan/src/content/get-started/configure-tunnels/assign-tunnel-priorities.md
index bd90fc769c0..9d8d1bb3f9f 100644
--- a/products/magic-wan/src/content/get-started/configure-tunnels/assign-tunnel-priorities.md
+++ b/products/magic-wan/src/content/get-started/configure-tunnels/assign-tunnel-priorities.md
@@ -1,6 +1,6 @@
 ---
-title: Assign tunel properties
-order: 5
+title: Create static routes
+order: 
 pcx-content-type: how-to
 ---
 
diff --git a/products/magic-wan/src/content/get-started/configure-tunnels/map-route-prefixes.md b/products/magic-wan/src/content/get-started/configure-tunnels/map-route-prefixes.md
deleted file mode 100644
index 9fe96bf1e76..00000000000
--- a/products/magic-wan/src/content/get-started/configure-tunnels/map-route-prefixes.md
+++ /dev/null
@@ -1,18 +0,0 @@
----
-title: Map route prefixes
-order: 6
-pcx-content-type: how-to
----
-
-# Map route prefixes smaller than /24
-
-Before Cloudflare can route your traffic from the edge to your locations via GRE tunnels, you must provide your prefixes and the tunnels to which they should be mapped, similar to the example in the table below.
-
-| Prefix          | GRE Tunnel |
-| --------------- | ---------- |
-| 103.21.244.0/29 | GRE_1_IAD  |
-| 103.21.244.8/29 | GRE_2_ATL  |
-
-The minimum advertising prefix is /24. However, because Cloudflare uses GRE tunnels as an outer wrapper for your traffic, Cloudflare can route prefixes within that /24 to different tunnel endpoints.
-
-For example, you can send `x.x.x.0/29` to Datacenter 1 and `x.x.x.8/29` to Datacenter 2, which is helpful when operating in environments with constrained IP resources.
\ No newline at end of file
diff --git a/products/magic-wan/src/content/get-started/configure-tunnels/specify-ip-addresses.md b/products/magic-wan/src/content/get-started/configure-tunnels/specify-ip-addresses.md
index 8c082808aec..d3ee12586a8 100644
--- a/products/magic-wan/src/content/get-started/configure-tunnels/specify-ip-addresses.md
+++ b/products/magic-wan/src/content/get-started/configure-tunnels/specify-ip-addresses.md
@@ -1,6 +1,6 @@
 ---
 title: Specify IP address for endpoint health checks
-order: 7
+order: 
 pcx-content-type: how-to
 ---
 
diff --git a/products/magic-wan/src/content/get-started/configure-tunnels/specify-tunnel-endpoints.md b/products/magic-wan/src/content/get-started/configure-tunnels/specify-tunnel-endpoints.md
index 5c5beceb811..a38072fa13c 100644
--- a/products/magic-wan/src/content/get-started/configure-tunnels/specify-tunnel-endpoints.md
+++ b/products/magic-wan/src/content/get-started/configure-tunnels/specify-tunnel-endpoints.md
@@ -1,6 +1,6 @@
 ---
 title: Specify tunnel endpoints
-order: 4
+order: 
 pcx-content-type: how-to
 ---
 
diff --git a/products/magic-wan/src/content/reference/configuration-examples.md b/products/magic-wan/src/content/reference/configuration-examples.md
index 34ddda84b6c..fd7a1334adc 100644
--- a/products/magic-wan/src/content/reference/configuration-examples.md
+++ b/products/magic-wan/src/content/reference/configuration-examples.md
@@ -1,5 +1,5 @@
 ---
-order: 9
+order: 
 pcx-content-type: reference
 ---
 
diff --git a/products/magic-wan/src/content/reference/index.md b/products/magic-wan/src/content/reference/index.md
index 94b2c2df818..6dd24c0a4e3 100644
--- a/products/magic-wan/src/content/reference/index.md
+++ b/products/magic-wan/src/content/reference/index.md
@@ -1,5 +1,5 @@
 ---
-order: 8
+order: 
 pcx-content-type: navigation
 ---