Mini-Radio Control GUI Vercel version #212
Replies: 12 comments 7 replies
-
|
You can install this instead which supports the 99 slots now: https://github.com/Kabuse/Mini-Radio-Control/tree/main |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I'll wait to see if Vercel updates its web panel and allows memory management again. |
Beta Was this translation helpful? Give feedback.
-
|
Maybe try my fork - you just install uv and everything else is encapsulated as a single file (uv takes care of everything else in terms of dependencies, python version, etc) -- https://github.com/dustinsterk/Mini-Radio-Control/tree/main |
Beta Was this translation helpful? Give feedback.
-
Requirement is Python 3.7+, which means minimum 3.7. Should be fine with your newer version also. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I requested information for the web panel listed in the subject line. I know how Python works, and it should probably work on Linux... but on Windows 10 with Python version 3.13, there was no way to get it to work. Perhaps, with a few more tips in the dustindeck repository, it could have been used better. Unfortunately, not all of my OM friends use Linux; many still use Windows 10. All the best to you. |
Beta Was this translation helpful? Give feedback.
-
|
@paolettopn Here is the issue where the Vercel tool was announced by its author. Try asking there as well. |
Beta Was this translation helpful? Give feedback.
-
|
@GrzegorzZajac000 Maybe you can take a look? |
Beta Was this translation helpful? Give feedback.
-
Sure, but I'm on holidays. I will be back around 25th August ;) |
Beta Was this translation helpful? Give feedback.
-
|
No rush, enjoy your holidays! |
Beta Was this translation helpful? Give feedback.
-
|
I'm joining Max, enjoy your vacation! |
Beta Was this translation helpful? Give feedback.
-
|
@paolettopn The errors you posted here have nothing to do with memory slots ;) Clicking on a memory slot doesn't produce the expected effect because the ATS Mini doesn't have a serial command to use a given memory slot (@max-arnold FYI). Changing the memory slot in the ATS Mini also doesn't produce any results on the website because I never refresh the list, except when I reconnect the radio. |
Beta Was this translation helpful? Give feedback.
-
|
I just read this reply, which I'd missed among the many incoming emails. Above, you wrote that: But then I wonder why the Vercel.app software requires pressing the memory buttons if they can't be selected from the radio, precisely because those commands have no effect on the radio. Without wanting to flame anyone... |
Beta Was this translation helpful? Give feedback.
-
|
@paolettopn I just posted a small update, check it out when you have a moment ;) |
Beta Was this translation helpful? Give feedback.
-
|
I tried out the new dashboard at https://ats-mini-controller.vercel.app/ and it looks very interesting. You've done a great job, but there's still something wrong. When I press the Upload button to update the radio, after modifying one or more memories, it doesn't write to the radio. I'll try some more tests with an empty memory list, editing and adding new channels from the web. |
Beta Was this translation helpful? Give feedback.
-
|
I ran some further tests with the new web version of the portal, regarding the Upgrade procedure. I connected the radio via USB at 115,200 baud, and everything worked fine. In the second part of the log file, you'll see that even pressing the Upload button reports errors writing to the radio. Try running some tests on your radio to determine if the problem reported by the error is perhaps the band mode, which in this case is ALL. Making a change to any memory is automatically applied. If I save the memory file to my PC, the change is present in the memories.json file. |
Beta Was this translation helpful? Give feedback.
-
|
Hi @GrzegorzZajac000 I tried writing the contents of Slot 1 memory, entering the values VHF FM 106300000. The editor confirmed that the data had been written correctly. The same error persists... but other data continues to flow in the terminal that I can't understand. Example: continuously, without ever stopping.... |
Beta Was this translation helpful? Give feedback.
-
|
@paolettopn I'll take a look at it when I have some free time, although I don't have many of them lately :( |
Beta Was this translation helpful? Give feedback.
-
|
@paolettopn Small update ;) Check it |
Beta Was this translation helpful? Give feedback.
-
|
Wow @GrzegorzZajac000, You've made many people happy (including many of my Italian amateur radio and SWL friends) by giving them the ability to manage the radio from this web panel. '73 de Paolo IV3BVK (K1BVK) |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Hello everyone,
I would like to ask you who I should contact to report a malfunction of the web GUI:
https://ats-mini-controller.vercel.app/
The app works almost completely with the new firmware version 2.30, but all the memory buttons (which are read regularly) have no effect and do not change the radio tuning.
In the rerminal window, when pressing the various memory buttons, this error is indicated:
[22:14:02] Error sending command: TypeError: Cannot read properties of undefined (reading 'writer')
[22:14:03] Error sending command: TypeError: Cannot read properties of undefined (reading 'writer')
[22:14:04] Error sending command: TypeError: Cannot read properties of undefined (reading 'writer')
[22:14:04] Error sending command: TypeError: Cannot read properties of undefined (reading 'writer')
Thanks to anyone who can answer...
Beta Was this translation helpful? Give feedback.
All reactions