Update README.md

Author: realA10001986

README.md

@@ -1274,7 +1274,7 @@ In order to reduce the number of write operations and thereby prolong the life o
 
 ## Firmware Installation / Firmware Update
 
-If a previous version of the TCD firmware is installed on your device, you can update easily using the pre-compiled binary. Enter the [Config Portal](#the-config-portal), click on "Update & Upload", select the pre-compiled binary file ("**timecircuits-A10001986.XXXX.bin**" for A10001986 releases, "**Time_Circuits_Display_vX.YY.bin**" for CircuitSetup releases) provided in the [Release package](https://github.com/realA10001986/Time-Circuits-Display/releases), and click on *Update*. (Do not install "A-Car" and/or "GTE" labeled versions on standard versions of the TCD, those are for modified/different hardware! Unless you know for a fact that you have "A-Car" displays or a "GTE" keypad, you need the "standard" firmware file.)
+If a previous version of the TCD firmware is installed on your device, you can update easily using the pre-compiled binary. Enter the [Config Portal](#the-config-portal), click on "Update & Upload", select the pre-compiled binary file ("**timecircuits-A10001986-Vx.xxx-XXXX.bin**" for A10001986 releases, "**Time_Circuits_Display_vX.YY.bin**" for CircuitSetup releases) provided in the [Release package](https://github.com/realA10001986/Time-Circuits-Display/releases), and click on *Update*. (Do not install "A-Car" and/or "GTE" labeled versions on standard versions of the TCD, those are for modified/different hardware! Unless you know for a fact that you have "A-Car" displays or a "GTE" keypad, you need the "standard" firmware file.)
 
 <details>
 <summary>Installing on a fresh ESP32...</summary>
@@ -1328,7 +1328,7 @@ This leads to the [HomeAssistant/MQTT Settings page](#hamqtt-settings).
 
 This leads to the firmware update and audio upload page.
 
-In order to upload a new firmware, such as published in the [Release packages](https://github.com/realA10001986/Time-Circuits-Display/releases), select the "**timecircuits-A10001986.XXXX.bin**" or "**Time_Circuits_Display_vX.YY.bin**" file as contained in the Release package in the _top_ file selector and click *Update*. (Do not install "A-Car" and/or "GTE" labeled versions on standard versions of the TCD, those are for modified/different hardware! Unless you know for a fact that you have "A-Car" displays or a "GTE" keypad, you need the "standard" firmware file.)
+In order to upload a new firmware, such as published in the [Release packages](https://github.com/realA10001986/Time-Circuits-Display/releases), select the "**timecircuits-A10001986-Vx.xxx-XXXX.bin**" or "**Time_Circuits_Display_vX.YY.bin**" file as contained in the Release package in the _top_ file selector and click *Update*. (Do not install "A-Car" and/or "GTE" labeled versions on standard versions of the TCD, those are for modified/different hardware! Unless you know for a fact that you have "A-Car" displays or a "GTE" keypad, you need the "standard" firmware file.)
 
 You can also install the TCD's sound-pack on this page; download the sound-pack (which is included in every [Release package](https://github.com/realA10001986/Time-Circuits-Display/releases)), extract it and select the resulting TCDA.bin file in the _bottom_ file selector. Finally, click *Upload*. Note that an SD card is required for this operation.