Unable to change the address, once you set it the first time.

[beargun]

Once setting the I2C address, using the S option has no effect.

Steps to reproduce

• type S80 to select address 80
• type S81 to select address 81
• address is however still set to 80

This is because typing S will call the EEPROM_I2C_setAddress(); function, which will return the new address. However, nothing is done with the returned value.

Fix:
Change line 213 from EEPROM_I2C_setAddress(); to I2C_ADDRESS = EEPROM_I2C_setAddress();

PS, thanks for the awesome tool. Though it took me quite some time to figure out this problem, as I though it was an hardware issue, instead of the software I was using to read (-:

[Ghostbird]

Fix has been merged. Thanks for the heads up.
Note that I do not have a test set-up available, so I'd be much obliged if you could verify the correctness of the fix. (I made a few extra, mainly cosmetic, changes.)

[beargun]

Everything is working perfectly. I have verified it with a 2kbit EEPROM and my logic analyzer.

Thanks for the fast fix.