@openparachute/scribe

Audio transcription + LLM cleanup for Parachute. Whisper-compatible API, CLI, and library.

Takes audio in, returns clean text out. The opposite direction of @openparachute/narrate.

Conventions (naming, ports, scopes, governance) follow parachute-patterns — the ecosystem-wide source of truth.

Quick start

Two ways in: install via the hub (the canonical Parachute path), or clone the repo to run from source.

Install via the hub (recommended)

If you've got the Parachute hub running (the portal on :1939), one command installs scribe, assigns its canonical port (1943), registers it under the hub supervisor, and starts it:

parachute install scribe

In a terminal this prompts for a transcription provider + API key. To set them non-interactively:

parachute install scribe --scribe-provider groq --scribe-key gsk_…

Once installed, scribe is reachable through the hub at <hub-origin>/scribe/... — e.g. its admin/config UI is <hub-origin>/scribe/admin and the Whisper endpoint is <hub-origin>/scribe/v1/audio/transcriptions. The hub proxies /scribe/* from :1939 to scribe on loopback :1943. For a local hub, <hub-origin> is http://127.0.0.1:1939.

Clone and run from source

Requires Bun (curl -fsSL https://bun.sh/install | bash).

git clone https://github.com/ParachuteComputer/parachute-scribe
cd parachute-scribe
bun install

Transcribe a file:

bun src/cli.ts recording.wav

Start the HTTP server (port 1943):

bun src/cli.ts serve

How it works

Audio (wav/mp3/m4a) --> Transcription engine --> Raw text --> LLM cleanup (optional) --> Clean text

CLI

parachute-scribe <file>                   # Transcribe a file
parachute-scribe <file> --cleanup anthropic  # Transcribe + LLM cleanup (Anthropic API)
parachute-scribe <file> --transcribe groq # Use a specific transcription provider
parachute-scribe <file> --no-cleanup      # Skip cleanup even if configured
parachute-scribe <file> --json            # Output JSON: {"text": "..."}
parachute-scribe serve                    # Start HTTP server (port 1943)
parachute-scribe providers                # List available providers

Library

import { transcribe } from "@openparachute/scribe";

const text = await transcribe(audioFile);
const cleaned = await transcribe(audioFile, { cleanup: "anthropic" });

Check available providers:

import { availableProviders } from "@openparachute/scribe";

const { transcription, cleanup } = availableProviders();

HTTP API

Whisper-compatible. Any client that speaks the OpenAI Whisper API works without modification.

POST /v1/audio/transcriptions
Content-Type: multipart/form-data

file: <audio file>
model: <string>        # e.g. "parakeet-mlx", "groq"
cleanup: <bool>        # optional extension — run LLM cleanup

Response: { "text": "..." }

URL ingestion

For audio that already lives on the public web (podcast feed items, direct mp3/m4a/wav/ogg/flac/webm URLs):

POST /v1/audio/transcriptions-url
Content-Type: application/json

{
  "url": "https://example.com/episode-42.mp3",
  "cleanup": true,                         // optional
  "context": { "entries": [...] }          // optional proper-nouns block
}

Response: { "text": "...", "source": { "url": "...", "bytes": 1234567, "contentType": "audio/mpeg" } }

SSRF defenses: only http: / https: schemes; rejects localhost, loopback / private / link-local / CG-NAT / multicast IPs (re-checked on every redirect); 100 MiB body cap (override via SCRIBE_URL_MAX_BYTES); 5-minute timeout (SCRIBE_URL_TIMEOUT_MS). YouTube and other site extractors are NOT supported — use yt-dlp to extract audio first, then POST the resulting URL or file.

MCP transport

Scribe also speaks MCP at /scribe/mcp (streamable HTTP, stateless mode — restart-safe). Exposes two tools:

transcribe — accepts audio_base64 + optional filename, cleanup, context
transcribe-url — accepts url + optional cleanup, context

Same scope gate as the REST endpoints — scribe:transcribe required. Useful for agents inside containers (e.g. parachute-agent) that already have MCP wiring but no REST plumbing.

Streamable-HTTP MCP requires Accept: application/json, text/event-stream on every request — the SDK will refuse the negotiation without both types.

Other endpoints:

GET  /v1/models                    # List available transcription providers
GET  /health                       # Health check
GET  /.parachute/info              # Module identity (name, version, icon, kind)
GET  /.parachute/icon.svg          # Inline SVG icon
GET  /.parachute/config/schema     # Draft-07 JSON Schema for scribe's config
GET  /.parachute/config            # Current resolved runtime config values
*    /scribe/mcp                   # MCP (streamable HTTP)

Scribe reserves two scopes for future hub-issued-token enforcement: scribe:transcribe (request-time, per-call) and scribe:admin (config writes). Neither is enforced yet — scribe is loopback-trusted through launch — but the schema declares them under x-scopes for forward compat.

Transcription providers

Provider	Type	Notes
`parakeet-mlx`	Local	macOS / Apple Silicon only (MLX). Fastest local option. Default on Mac.
`onnx-asr`	Local	Cross-platform (the local backend for Linux, e.g. a DigitalOcean droplet). Parakeet via ONNX Runtime. See Local transcription backends for install + RAM.
`whisper`	Local	Any platform. Requires `whisper-ctranslate2` (`pip install whisper-ctranslate2`).
`groq`	Cloud	Fast, cheap (~$0.06/hr). Requires `GROQ_API_KEY`.
`openai`	Cloud	Reference Whisper API. Requires `OPENAI_API_KEY`.

Cleanup providers

Optional LLM pass that fixes transcription artifacts — filler words, punctuation, formatting.

Provider	Type	Notes
`anthropic`	Cloud	Anthropic API. Requires `ANTHROPIC_API_KEY` (or set via the admin SPA). Renamed from `claude` in 0.4.4 — legacy configs auto-migrate.
`claude-code`	Local CLI	Subscription-funded Claude via the Claude Code CLI. No API key — run `claude setup-token` on the host.
`ollama`	Local	Free, no API key. Requires Ollama running.
`openai`	Cloud	GPT-based. Requires `OPENAI_API_KEY`.
`gemini`	Cloud	Requires `GEMINI_API_KEY`.
`groq`	Cloud	Fast. Requires `GROQ_API_KEY`.
`custom`	Cloud	Any OpenAI-compatible endpoint. See env vars below.
`none`	-	Skip cleanup. Default.

Local transcription backends — install & sizing

The local backends (parakeet-mlx, onnx-asr, whisper) run an ASR model on your own CPU/GPU — no API key, no per-minute cost, audio never leaves the box. The tradeoff is that they need to be installed, and they need real RAM and CPU.

Pick the backend that matches your platform:

macOS / Apple Silicon → parakeet-mlx (the default; uses Apple's MLX).
Linux (incl. a DigitalOcean / Hetzner droplet) → onnx-asr (Parakeet via ONNX Runtime). parakeet-mlx is macOS-only and won't run here.
Either platform → whisper (whisper-ctranslate2), if you prefer Whisper.

macOS (Apple Silicon)

brew install ffmpeg              # decode non-WAV audio (mp3/m4a/…)
uv tool install parakeet-mlx    # or: pip install parakeet-mlx
# Make sure the tool is on PATH, then point scribe at it:
#   TRANSCRIBE_PROVIDER=parakeet-mlx   (the default)

For onnx-asr on Mac, follow the Linux pip install onnx-asr[cpu,hub] step below — it's cross-platform.

Linux (Debian / Ubuntu — the DigitalOcean case)

# 1. System prerequisites: Python + pip + ffmpeg.
sudo apt update
sudo apt install -y python3 python3-pip python3-venv ffmpeg

# 2. Install the onnx-asr CLI. A venv keeps it off the system Python:
python3 -m venv ~/.venvs/scribe-asr
source ~/.venvs/scribe-asr/bin/activate
pip install "onnx-asr[cpu,hub]"
# (uv works too: `uv tool install "onnx-asr[cpu,hub]"`)

# 3. Make `onnx-asr` reachable on scribe's PATH, then select the backend:
#   TRANSCRIBE_PROVIDER=onnx-asr
# NOTE: a venv only exports `onnx-asr` while activated — for scribe-as-a-daemon,
# add ~/.venvs/scribe-asr/bin to scribe's service PATH, or use `uv tool install`
# above (it puts the binary on PATH directly, no activation needed).

onnx-asr[cpu,hub] pulls in CPU ONNX Runtime plus the model-download helpers. The model (default nemo-parakeet-tdt-0.6b-v3) is fetched from Hugging Face on first use. ffmpeg is required to decode anything that isn't already WAV.

The admin SPA's backend check (and GET /scribe/admin/backend-availability) tells you exactly which binary or system dep is missing — if a backend shows as unavailable, that report names the precise pip install / apt install fix.

Don't want to run the steps by hand? Scribe can install the local backend for this platform for you — the runnable companion to the diagnose-only report:

parachute-scribe doctor              # diagnose every backend (no changes)
parachute-scribe doctor --fix        # diagnose, then INSTALL the local backend
parachute-scribe install-backend     # install only (onnx-asr on Linux, parakeet-mlx on macOS)
parachute-scribe install-backend onnx-asr --skip-model   # explicit backend, skip the model warm-pull

--fix / install-backend is idempotent + non-fatal (safe to re-run; a failed step reports and exits non-zero but never leaves a half-install). On Linux it apt-installs python3/python3-venv/ffmpeg (using sudo when not root) and installs the CLI via uv tool install or a venv + pip; on macOS it installs via uv/pip and instructs brew install ffmpeg if ffmpeg is missing. It then warm-pulls the default model (nemo-parakeet-tdt-0.6b-v3) and re-runs the detector to verify. It refuses on a box with less than ~2 GB available RAM and steers you to a cloud provider (see the sizing caveat below).

Sizing caveat — local ASR needs real RAM

The ONNX Parakeet model is not tiny once loaded into memory. Be honest with yourself about the box:

A 1 GB droplet (DigitalOcean's smallest) will struggle. Loading the model plus ONNX Runtime can exceed available RAM — expect the process to be killed by the OOM killer, or to swap so hard that a few minutes of audio takes a very long time. Don't plan on running local ASR there.
~2 GB RAM is a realistic floor, and 4 GB+ is comfortable for routine use. More CPU cores = faster transcription; there's no GPU requirement, but a bigger box helps a lot.

If you're on a small droplet and don't want to size up, use a cloud transcription provider instead — groq (fast, ~$0.06/hr) or openai. These do the heavy lifting on the provider's hardware, so scribe stays light:

# Switch scribe to a hosted transcription backend (no local model needed):
TRANSCRIBE_PROVIDER=groq
GROQ_API_KEY=gsk_…
# or: TRANSCRIBE_PROVIDER=openai  +  OPENAI_API_KEY=sk-…

See Provider setup for where that key goes (admin SPA, env var, or config file). The other option is to keep local ASR but run scribe on a larger box / a dedicated transcription host that vault and the hub reach over the network.

Provider setup — where does my API key go?

Local providers (parakeet-mlx, onnx-asr, whisper, ollama, claude-code) need no key. Cloud providers need one. Scribe reads a provider's key from three places, in precedence order — config file > env var > built-in default:

The admin SPA (hub installs). Open <hub-origin>/scribe/admin, pick your provider, paste the key. Scribe writes it into ~/.parachute/scribe/config.json under transcribeProviders.<name> / cleanupProviders.<name>. Updating a key for the provider you're already on takes effect on the next request. Selecting or switching a provider needs a restart (parachute restart scribe) — the admin SPA flags this too. This is the path for hub-managed installs.

An env var — the right path for source / CLI runs. Put keys in ~/.parachute/scribe/.env (or your shell environment):

Provider	Key env var	Used for
`groq`	`GROQ_API_KEY`	transcription + cleanup
`openai`	`OPENAI_API_KEY`	transcription + cleanup
`anthropic`	`ANTHROPIC_API_KEY`	cleanup
`gemini`	`GEMINI_API_KEY`	cleanup
`custom`	`CLEANUP_API_KEY`	cleanup

claude-code is the no-key Anthropic path: it shells out to the Claude Code CLI and uses your existing subscription auth — run claude setup-token on the host instead of setting a key.

The full env-var surface (model overrides, endpoints) is in Environment variables below; .env.example is the copy-paste starting point.

Environment variables

# Transcription
TRANSCRIBE_PROVIDER=parakeet-mlx    # Default transcription engine

# Cleanup
CLEANUP_PROVIDER=none               # Default cleanup engine

# API keys (as needed by your chosen providers)
GROQ_API_KEY=gsk_...
OPENAI_API_KEY=sk-...
ANTHROPIC_API_KEY=sk-ant-...
GEMINI_API_KEY=...

# Ollama
OLLAMA_URL=http://localhost:11434    # Default Ollama endpoint
OLLAMA_MODEL=gemma4:e4b              # Default cleanup model

# Custom OpenAI-compatible provider
CUSTOM_CLEANUP_URL=...
CUSTOM_CLEANUP_API_KEY=...
CUSTOM_CLEANUP_MODEL=...

# Server
SCRIBE_PORT=1943                     # HTTP server port (PORT also honored for back-compat)

# Auth (optional)
SCRIBE_AUTH_TOKEN=                   # If set, require Authorization: Bearer <token> on all routes
                                     # except /health and /.parachute/info. Unset = open (loopback-only).

Auth

By default scribe is open — any caller on a network it's bound to can transcribe. For exposed deployments (tailnet, funnel, shared hosts), set SCRIBE_AUTH_TOKEN and pass it as Authorization: Bearer <token> on every request. /health and /.parachute/info stay open so liveness probes and module discovery work without a secret.

SCRIBE_AUTH_TOKEN=$(openssl rand -hex 32) bun src/cli.ts serve

curl -H "Authorization: Bearer $SCRIBE_AUTH_TOKEN" \
  -F "file=@recording.wav" \
  http://localhost:1943/v1/audio/transcriptions

401 response shape: {"error":"unauthorized","message":"SCRIBE_AUTH_TOKEN required"}. CORS headers are included so browser clients can read the error.

Proper-noun context

Cleanup improves when scribe knows the proper nouns you care about — so mishearings like "learn by build" become "Learn Vibe Build". Callers push context alongside the audio as a context multipart part:

curl -F "file=@memo.wav" \
  -F 'context={"entries":[{"name":"Learn Vibe Build","summary":"6-week cohort","aliases":["LVB","Learn by Build"]}]};type=application/json' \
  http://localhost:1943/v1/audio/transcriptions

Scribe uses whatever you push and never initiates outbound HTTP on its own. This is what Parachute Vault does — it queries its own notes and pushes the result with each transcription.

Older scribe versions (0.2.x and earlier) pulled context from a configured vault via a vault: block in scribe/config.json. That path was removed in 0.3.0. A stale vault: block in your config is ignored with a one-time warning on load; delete it once you see the warning. Callers that used to rely on it (vault, custom integrations) must now push context in the request.

Default config path is ${PARACHUTE_HOME:-~/.parachute}/scribe/config.json. Set SCRIBE_CONFIG=/path/to/config.json (or pass --config <path> on the CLI) to point somewhere else. An older ~/.parachute/scribe.config.json is auto-migrated to the new path on first run.

Customizing the cleanup prompt

Override scribe's built-in cleanup system prompt or change how proper nouns are appended, in ~/.parachute/scribe/config.json:

{
  "cleanup": {
    "provider": "claude-code",
    "default": true,
    "system_prompt": "You clean up voice memos. Be conservative.",
    "context_template": "\n\nKnown names:\n{{proper_nouns}}"
  }
}

system_prompt replaces the built-in prompt verbatim. context_template controls how the proper-nouns block (sent in the request's context part) is appended — the single variable {{proper_nouns}} is substituted with the block, or left empty when no context was provided.

How vault uses scribe

Parachute Vault optionally imports scribe via await import("@openparachute/scribe"). When installed, vault gains:

POST /v1/audio/transcriptions — Whisper-compatible endpoint
POST /api/ingest — Upload audio + auto-transcribe into a note
Auto-transcription hook — notes tagged #capture with audio attachments get transcribed automatically

To enable: install scribe alongside vault via bun link or npm, then configure TRANSCRIBE_PROVIDER in ~/.parachute/.env.

Requirements

Bun
A transcription provider (local or cloud)
ffmpeg on PATH (some providers need it for audio conversion)

License

AGPL-3.0

Name		Name	Last commit message	Last commit date
Latest commit History 74 Commits
.github/workflows		.github/workflows
.parachute		.parachute
src		src
.env.example		.env.example
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
CLAUDE.md		CLAUDE.md
LICENSE		LICENSE
README.md		README.md
RELEASING.md		RELEASING.md
bun.lock		bun.lock
package.json		package.json
scribe.config.example.json		scribe.config.example.json
tsconfig.json		tsconfig.json

Navigation Menu

Uh oh!

Repository files navigation

@openparachute/scribe

Quick start

Install via the hub (recommended)

Clone and run from source

How it works

CLI

Library

HTTP API

URL ingestion

MCP transport

Transcription providers

Cleanup providers

Local transcription backends — install & sizing

macOS (Apple Silicon)

Linux (Debian / Ubuntu — the DigitalOcean case)

Sizing caveat — local ASR needs real RAM

Provider setup — where does my API key go?

Environment variables

Auth

Proper-noun context

Customizing the cleanup prompt

How vault uses scribe

Requirements

License

About

Releases

Packages

Contributors

Languages

Uh oh!

Folders and files

Latest commit

History

Repository files navigation

@openparachute/scribe

Quick start

Install via the hub (recommended)

Clone and run from source

How it works

CLI

Library

HTTP API

URL ingestion

MCP transport

Transcription providers

Cleanup providers

Local transcription backends — install & sizing

macOS (Apple Silicon)

Linux (Debian / Ubuntu — the DigitalOcean case)

Sizing caveat — local ASR needs real RAM

Provider setup — where does my API key go?

Environment variables

Auth

Proper-noun context

Customizing the cleanup prompt

How vault uses scribe

Requirements

License

About

Resources

Contributing

Stars

Watchers

Forks

Releases

Packages

Contributors

Languages