CLOUDSTACK-9202 Bump ssh timeout for VR commands

[remibergsma]

It seems the VR needs more time for some of its commands. Until we figured out the root cause, this allows the VRs to start again.

Error seen:

2015-12-28 14:35:18,201 ERROR [c.c.n.r.VirtualNetworkApplianceManagerImpl] (Work-Job-Executor-1:ctx-34ff7f80 job-39723/job-39726 ctx-d63de41b) Timed out in waiting SSH execution result
2015-12-28 14:35:18,201 WARN [c.c.n.r.VirtualNetworkApplianceManagerImpl] (Work-Job-Executor-1:ctx-34ff7f80 job-39723/job-39726 ctx-d63de41b) Command: com.cloud.agent.api.Command failed while starting virtua
l router
2015-12-28 14:35:18,201 INFO [c.c.v.VirtualMachineManagerImpl] (Work-Job-Executor-1:ctx-34ff7f80 job-39723/job-39726 ctx-d63de41b) The guru did not like the answers so stopping VM[DomainRouter|r-1534-VM]
.Answer":{"result":true,"wait":0}},{"com.cloud.agent.api.Answer":{"result":false,"details":"Timed out in waiting SSH execution result","wait":0}}] }

[jayapalu]

@remibergsma
I am facing the same issue while running the tests for strongswan s2s vpn.
I will apply this patch and run the tests once.

[remibergsma]

With this fix it survives longer wait times:

2015-12-29 12:40:02,011 DEBUG [c.c.a.r.v.VirtualRoutingResource] (DirectAgent-111:ctx-d584fccd) Processing ScriptConfigItem, executing update_config.py forwarding_rules.json took 63767ms

[remibergsma]

Especially in combination with bumping global setting router.aggregation.command.each.timeout from its default of 3 sec to something like 10-15 will resolve most issues. The issue that remains is of course why it takes so long in the first place. But at least it doesn't fail anymore.

[wido]

LGTM based on the code. Didn't perform a test on it. Trivial fix for some integers.

[remibergsma]

LGTM based on these tests:

nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=true \
component/test_vpc_redundant.py \
component/test_routers_iptables_default_policy.py \
component/test_routers_network_ops.py \
component/test_vpc_router_nics.py \
smoke/test_loadbalance.py \
smoke/test_internal_lb.py \
smoke/test_ssvm.py \
smoke/test_network.py

Result:

Create a redundant VPC with two networks with two VMs in each network ... === TestName: test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL | Status : SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network and check default routes ... === TestName: test_02_redundant_VPC_default_routes | Status : SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network ... === TestName: test_03_create_redundant_VPC_1tier_2VMs_2IPs_2PF_ACL_reboot_routers | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName: test_02_routervm_iptables_policies | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policies on VPC router ... === TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_01_isolate_network_FW_PF_default_routes_egress_true | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_02_isolate_network_FW_PF_default_routes_egress_false | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test nics after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test default routes ... === TestName: test_02_VPC_default_routes | Status : SUCCESS ===
ok
Check the password file in the Router VM ... === TestName: test_isolate_network_password_server | Status : SUCCESS ===
ok
Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... === TestName: test_router_dhcphosts | Status : SUCCESS ===
ok
Test to create Load balancing rule with source NAT ... === TestName: test_01_create_lb_rule_src_nat | Status : SUCCESS ===
ok
Test to create Load balancing rule with non source NAT ... === TestName: test_02_create_lb_rule_non_nat | Status : SUCCESS ===
ok
Test for assign & removing load balancing rule ... === TestName: test_assign_and_removal_lb | Status : SUCCESS ===
ok
Test to verify access to loadbalancer haproxy admin stats page ... === TestName: test02_internallb_haproxy_stats_on_all_interfaces | Status : SUCCESS ===
ok
Test create, assign, remove of an Internal LB with roundrobin http traffic to 3 vm's ... === TestName: test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS ===
ok
Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : SUCCESS ===
ok
Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : SUCCESS ===
ok
Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
ok
Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
ok
Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS ===
ok
Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS ===
ok
Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : SUCCESS ===
ok
Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status : SUCCESS ===
ok
Test Remote Access VPN in VPC ... === TestName: test_vpc_remote_access_vpn | Status : SUCCESS ===
ok
Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status : SUCCESS ===
ok
Test for port forwarding on source NAT ... === TestName: test_01_port_fwd_on_src_nat | Status : SUCCESS ===
ok
Test for port forwarding on non source NAT ... === TestName: test_02_port_fwd_on_non_src_nat | Status : SUCCESS ===
ok
Test for reboot router ... === TestName: test_reboot_router | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule | Status : SUCCESS ===
ok

----------------------------------------------------------------------
Ran 34 tests in 17286.238s

OK

And:

nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=false \
smoke/test_routers.py \
smoke/test_network_acl.py \
smoke/test_privategw_acl.py \
smoke/test_reset_vm_on_reboot.py \
smoke/test_vm_life_cycle.py \
smoke/test_vpc_vpn.py \
smoke/test_service_offerings.py \
component/test_vpc_offerings.py \
component/test_vpc_routers.py

Result:

Test router internal advanced zone ... === TestName: test_02_router_internal_adv | Status : SUCCESS ===
ok
Test restart network ... === TestName: test_03_restart_network_cleanup | Status : SUCCESS ===
ok
Test router basic setup ... === TestName: test_05_router_basic | Status : SUCCESS ===
ok
Test router advanced setup ... === TestName: test_06_router_advanced | Status : SUCCESS ===
ok
Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS ===
ok
Test start router ... === TestName: test_08_start_router | Status : SUCCESS ===
ok
Test reboot router ... === TestName: test_09_reboot_router | Status : SUCCESS ===
ok
Test reset virtual machine on reboot ... === TestName: test_01_reset_vm_on_reboot | Status : SUCCESS ===
ok
Test advanced zone virtual router ... === TestName: test_advZoneVirtualRouter | Status : SUCCESS ===
ok
Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : SUCCESS ===
ok
Test Multiple Deploy Virtual Machine ... === TestName: test_deploy_vm_multiple | Status : SUCCESS ===
ok
Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : SUCCESS ===
ok
Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : SUCCESS ===
ok
Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : SUCCESS ===
ok
Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status : SUCCESS ===
ok
Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status : SUCCESS ===
ok
Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
ok
Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm | Status : SUCCESS ===
ok
Test to create service offering ... === TestName: test_01_create_service_offering | Status : SUCCESS ===
ok
Test to update existing service offering ... === TestName: test_02_edit_service_offering | Status : SUCCESS ===
ok
Test to delete service offering ... === TestName: test_03_delete_service_offering | Status : SUCCESS ===
ok
Test for delete account ... === TestName: test_delete_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for admin account ... === TestName: test_public_ip_admin_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for user account ... === TestName: test_public_ip_user_account | Status : SUCCESS ===
ok
Test for release public IP address ... === TestName: test_releaseIP | Status : SUCCESS ===
ok
Test create VPC offering ... === TestName: test_01_create_vpc_offering | Status : SUCCESS ===
ok
Test VPC offering without load balancing service ... === TestName: test_03_vpc_off_without_lb | Status : SUCCESS ===
ok
Test VPC offering without static NAT service ... === TestName: test_04_vpc_off_without_static_nat | Status : SUCCESS ===
ok
Test VPC offering without port forwarding service ... === TestName: test_05_vpc_off_without_pf | Status : SUCCESS ===
ok
Test VPC offering with invalid services ... === TestName: test_06_vpc_off_invalid_services | Status : SUCCESS ===
ok
Test update VPC offering ... === TestName: test_07_update_vpc_off | Status : SUCCESS ===
ok
Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : SUCCESS ===
ok
test_09_create_redundant_vpc_offering (integration.component.test_vpc_offerings.TestVPCOffering) ... === TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS ===
ok
Test start/stop of router after addition of one guest network ... === TestName: test_01_start_stop_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test reboot of router after addition of one guest network ... === TestName: test_02_reboot_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to change service offering of router after addition of one guest network ... === TestName: test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test destroy of router after addition of one guest network ... === TestName: test_05_destroy_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to stop and start router after creation of VPC ... === TestName: test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
ok
Test to reboot the router after creating a VPC ... === TestName: test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
ok
Tests to change service offering of the Router after ... === TestName: test_04_change_service_offerring_vpc | Status : SUCCESS ===
ok
Test to destroy the router after creating a VPC ... === TestName: test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
ok

----------------------------------------------------------------------
Ran 41 tests in 8487.523s

OK

We successfully run this on a production cloud.

[wilderrodrigues]

Ping @remibergsma

LGTM, please proceed with merge.

Cheers,
Wilder