Add Nvim terminal emulator key mappings

[ghost]

No description provided.

[christoomey]

This looks fine to me, but I'm not an Nvim user. @blueyed @geoffharcourt are either of you Nvim users / willing to test this out and verify that all is well?

[blueyed]

It was added and reverted already: #129.

[geoffharcourt]

Selfishly I'd rather have FZF work than terminal mode in nvim work.

[blueyed]

Of course.
It might be possible to detect it though?!

[christoomey]

If there is a fundamental incompatibility here between fzf.vim and nvim terminal mode mappings, we'll need to stick with not including these mappings. That said, we can always add a section to the readme with notes on this. It's getting big enough that it might be time to pull all non-install non-usage content out into a separate document.

[geoffharcourt]

I think it might be hard to detect FZF, since people may use FZF without the author's Vim plugin.

[blueyed]

It should be detectable as the program running in the term window.. and "fzf" shows up both when using :FZF, or fzf itself in a :term window for me.

[blueyed]

fzf gets detected in the custom key bindings mentioned in https://blog.bugsnag.com/tmux-and-vim/.

[ssh352]

so I press esc to get from terminal mode to normal mode, then use ctrl-j,k,l to move around, is that what you do as the workaround?

[Nelyah]

@ssh352 I might come late to the party, but these mapping work for me in neovim 0.4.2:

tnoremap <silent> <m-h> <C-\><C-n>:TmuxNavigateLeft<cr>
tnoremap <silent> <m-j> <C-\><C-n>:TmuxNavigateDown<cr>
tnoremap <silent> <m-k> <C-\><C-n>:TmuxNavigateUp<cr>
tnoremap <silent> <m-l> <C-\><C-n>:TmuxNavigateRight<cr>

[kdheepak]

It would be useful to have this feature. For fzf and other tools in a neovim terminal buffer, the convention seems to be to set filetype accordingly. Is it not possible to add the tnoremap per <buffer> depending on some predicate? If it is possible we can use a autocmd when opening term://* and make sure that filetype= before adding the above tnoremaps.

[kdheepak]

It turns out fzf does not set a filetype. neoranger.vim and lazygit.vim set filetype to the name of the application that is being run.

If not for the above caveat, the following would work.

function s:AddTerminalNavigation()

    if &filetype ==# ''
        tnoremap <buffer> <silent> <c-h> <c-\><c-n>:TmuxNavigateLeft<cr>
        tnoremap <buffer> <silent> <c-j> <c-\><c-n>:TmuxNavigateDown<cr>
        tnoremap <buffer> <silent> <c-k> <c-\><c-n>:TmuxNavigateUp<cr>
        tnoremap <buffer> <silent> <c-l> <c-\><c-n>:TmuxNavigateRight<cr>
    endif

endfunction

augroup TerminalNavigation
    autocmd!
    autocmd TermOpen * call s:AddTerminalNavigation()
augroup END

Anyone see any problem with doing it this way?

[patrickdepinguin]

I bumped into this issue because I could not use my regular mappings to navigate from a :terminal to a vim pane, while navigation from a vim pane is set up to use :TmuxNavigateX. Note that I'm not actually inside tmux here. Neither do I use fzf.

In my .vimrc I had custom key bindings as described in https://github.com/christoomey/vim-tmux-navigator/#custom-key-bindings , and it took me a while to realize that my problem was caused because these instructions use 'nnoremap' and as such only work in normal mode. If I duplicate them as 'tnoremap' and add '' before each binding replacement, then I can navigate from a :terminal to another vim pane as I want.

So in total I now have:

"Cycle between tmux/vim seamlessly
let g:tmux_navigator_no_mappings = 1
nnoremap <silent> <A-Left>  :TmuxNavigateLeft<cr>
nnoremap <silent> <A-Down>  :TmuxNavigateDown<cr>
nnoremap <silent> <A-Up>    :TmuxNavigateUp<cr>
nnoremap <silent> <A-Right> :TmuxNavigateRight<cr>
nnoremap <silent> <A-z>     :TmuxNavigatePrevious<cr>
nnoremap <silent> <A-h>     :TmuxNavigateLeft<cr>
nnoremap <silent> <A-j>     :TmuxNavigateDown<cr>
nnoremap <silent> <A-k>     :TmuxNavigateUp<cr>
nnoremap <silent> <A-l>     :TmuxNavigateRight<cr>
"additional mappings to support urxvt
nnoremap <silent> <Esc><Left>  :TmuxNavigateLeft<cr>
nnoremap <silent> <Esc><Down>  :TmuxNavigateDown<cr>
nnoremap <silent> <Esc><Up>    :TmuxNavigateUp<cr>
nnoremap <silent> <Esc><Right> :TmuxNavigateRight<cr>
nnoremap <silent> <Esc>z       :TmuxNavigatePrevious<cr>
nnoremap <silent> <Esc>h       :TmuxNavigateLeft<cr>
nnoremap <silent> <Esc>j       :TmuxNavigateDown<cr>
nnoremap <silent> <Esc>k       :TmuxNavigateUp<cr>
nnoremap <silent> <Esc>l       :TmuxNavigateRight<cr>

"terminal mode
tnoremap <silent> <A-Left>  <C-W>:TmuxNavigateLeft<cr>
tnoremap <silent> <A-Down>  <C-W>:TmuxNavigateDown<cr>
tnoremap <silent> <A-Up>    <C-W>:TmuxNavigateUp<cr>
tnoremap <silent> <A-Right> <C-W>:TmuxNavigateRight<cr>
tnoremap <silent> <A-z>     <C-W>:TmuxNavigatePrevious<cr>
tnoremap <silent> <A-h>     <C-W>:TmuxNavigateLeft<cr>
tnoremap <silent> <A-j>     <C-W>:TmuxNavigateDown<cr>
tnoremap <silent> <A-k>     <C-W>:TmuxNavigateUp<cr>
tnoremap <silent> <A-l>     <C-W>:TmuxNavigateRight<cr>
"additional mappings to support urxvt
tnoremap <silent> <Esc><Left>  <C-W>:TmuxNavigateLeft<cr>
tnoremap <silent> <Esc><Down>  <C-W>:TmuxNavigateDown<cr>
tnoremap <silent> <Esc><Up>    <C-W>:TmuxNavigateUp<cr>
tnoremap <silent> <Esc><Right> <C-W>:TmuxNavigateRight<cr>
tnoremap <silent> <Esc>z       <C-W>:TmuxNavigatePrevious<cr>
tnoremap <silent> <Esc>h       <C-W>:TmuxNavigateLeft<cr>
tnoremap <silent> <Esc>j       <C-W>:TmuxNavigateDown<cr>
tnoremap <silent> <Esc>k       <C-W>:TmuxNavigateUp<cr>
tnoremap <silent> <Esc>l       <C-W>:TmuxNavigateRight<cr>

This may be obvious to some, but since it took me a while I guess there are other people that may find this helpful :-)