PinkTorch Setup

1. Install Arduino IDE

2. Install required libraries over internet

a. Adafruit Unified Sensors

b. Adafruit BNO055:1.4.3

c. FastLED 3.4.0

4. Install Teensyduino (https://www.pjrc.com/teensy/td_download.html)

5. Run Arduino IDE, select the right port and Teensy3.2 as the Arduino model

6. Open and Compile pink-flame.ino

7. Make sure pin values are correctly assigned as per the actual wiring

8. Upload the code to Teensy3.2