Support for the Turing RK1

[jphastings]

Feature Request

I'd really appreciate Turing RK1 support for Talos. (They've started shipping!)

Description

It looks as though @pl4nty has already been working on support for the RK1 — but I'm not sure what the next steps would be! I'm happy to help if I can!

[pl4nty]

Work has centralised on @nberlee's fork, pending #8065. I think the main focus is testing - it would be great if you can install and report any issues. I haven't touched the project in a while since my modules haven't arrived yet

[jphastings]

As soon as mine arrives I shall!

[nberlee]

Thank you @pl4nty,

The versions released in this repository are quite stable (thx also to @bhuism), and are usually released a few hours after they are released here. Our primary goal was to achieve a stable release, which we have now accomplished. Therefore, this repository will remain active until the release of Talos 1.7, which will include kernel 6.6 and support for the SBC community.

But if you have any problems, please report them so it can be fixed. HDMI/video codecs will not be supported as it is too much to patch from Kernel 6.6, the rest will just work as you expect from any Talos Image.

[bhuism]

Works perfectly for me

[DrummyFloyd]

as soon as i get mine , will test too ( but dunnon when , because i order 3 RK1 with 32Go so bit of delay regarding them .. =)

how the migration will be done once this fork will be merge into 1.7 talos release ?

[danbanta]

Thank you @nberlee for the fork. I currently have a cluster up with 4 RK1 modules on the Turning Pi 2. I set mine up with Cilium so I hope to add to camrossi's Example With Cilium soon.

But if you have any problems, please report them so it can be fixed. HDMI/video codecs will not be supported as it is too much to patch from Kernel 6.6, the rest will just work as you expect from any Talos Image.

I am very interested in seeing what is involved with getting the HDMI / video codecs (GPU) working. If you have any information to share or advise; I would gladly read it. Thank you!

[usrbinkat]

I've had mostly good success with the RK1 modules and the forked image. I am hitting a wall though with configuring a br0 linux bridge.

I captured all steps to reproduce the issue on this README.md

This config works great: 51.no-bridge.controlplane.yaml

This config controlplane.yaml results in this error log bridge-error.log

Details

# tpi uart --node 1 get | tee -a /mnt/sdcard/uart.1.log
ntered allmulticast mode
[ 2959.461379] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: entered promiscuous mode
[ 2959.470244] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2959.491054] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to initialize vlan filtering on this port
[ 2959.502379] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: left allmulticast mode
[ 2959.511273] [talos] controller failed {"component": "controller-runtime", "controller": "network.LinkSpecController", "error": "1 error occurred:\n\t* error enslaving/unslaving link \"enxe69ff8d7c455\" under \"br0\": netlink receive: device or resource busy\n\n"}
[ 2959.537450] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2959.559030] [talos] no suitable node IP found, please make sure .machine.kubelet.nodeIP filters and pod/service subnets are set up correctly {"component": "controller-runtime", "controller": "k8s.NodeIPController"}
[ 2959.580378] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2959.615797] [talos] created route {"component": "controller-runtime", "controller": "network.RouteSpecController", "destination": "default", "gateway": "192.168.1.1", "table": "main", "link": "br0", "priority": 1024, "family": "inet4"}
[ 2959.847167] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 2959.858785] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-1
[ 2960.079112] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 2960.101853] dwmac4: Master AXI performs any burst length
[ 2960.107867] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: No Safety Features support found
[ 2960.117488] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: IEEE 1588-2008 Advanced Timestamp supported
[ 2960.128660] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: registered PTP clock
[ 2960.137395] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue start
[ 2960.145745] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: configuring for phy/rgmii-rxid link mode
[ 2960.183288] 8021q: adding VLAN 0 to HW filter on device enxe69ff8d7c455
[ 2960.226561] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue stop
[ 2960.235050] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2960.245134] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to kill vid 0081/0
[ 2960.254837] br0: port 1(enxe69ff8d7c455) entered blocking state
[ 2960.261506] br0: port 1(enxe69ff8d7c455) entered disabled state
[ 2960.268233] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: entered allmulticast mode
[ 2960.277549] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2960.311121] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to initialize vlan filtering on this port
[ 2960.322402] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: left allmulticast mode
[ 2960.331300] [talos] controller failed {"component": "controller-runtime", "controller": "network.LinkSpecController", "error": "1 error occurred:\n\t* error enslaving/unslaving link \"enxe69ff8d7c455\" under \"br0\": netlink receive: device or resource busy\n\n"}
[ 2960.357419] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2960.386990] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2960.744730] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 2960.757024] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-1
[ 2961.006935] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 2961.029732] dwmac4: Master AXI performs any burst length
[ 2961.035737] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: No Safety Features support found
[ 2961.045360] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: IEEE 1588-2008 Advanced Timestamp supported
[ 2961.056420] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: registered PTP clock
[ 2961.065131] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue start
[ 2961.073485] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: configuring for phy/rgmii-rxid link mode
[ 2961.111284] 8021q: adding VLAN 0 to HW filter on device enxe69ff8d7c455
[ 2961.154211] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue stop
[ 2961.162664] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2961.172749] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to kill vid 0081/0
[ 2961.182040] br0: port 1(enxe69ff8d7c455) entered blocking state
[ 2961.188704] br0: port 1(enxe69ff8d7c455) entered disabled state
[ 2961.195371] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: entered allmulticast mode
[ 2961.204423] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2961.226934] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to initialize vlan filtering on this port
[ 2961.238292] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: left allmulticast mode
[ 2961.247200] [talos] controller failed {"component": "controller-runtime", "controller": "network.LinkSpecController", "error": "1 error occurred:\n\t* error enslaving/unslaving link \"enxe69ff8d7c455\" under \"br0\": netlink receive: device or resource busy\n\n"}
[ 2961.273360] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2961.304887] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2961.922102] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 2961.934300] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-1
[ 2962.146906] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 2962.169643] dwmac4: Master AXI performs any burst length
[ 2962.175681] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: No Safety Features support found
[ 2962.185277] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: IEEE 1588-2008 Advanced Timestamp supported
[ 2962.196427] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: registered PTP clock
[ 2962.205208] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue start
[ 2962.213567] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: configuring for phy/rgmii-rxid link mode
[ 2962.251072] 8021q: adding VLAN 0 to HW filter on device enxe69ff8d7c455
[ 2962.283286] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue stop
[ 2962.291760] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2962.301844] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to kill vid 0081/0
[ 2962.311155] br0: port 1(enxe69ff8d7c455) entered blocking state
[ 2962.317799] br0: port 1(enxe69ff8d7c455) entered disabled state
[ 2962.324464] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: entered allmulticast mode
[ 2962.333519] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2962.374871] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to initialize vlan filtering on this port
[ 2962.386449] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: left allmulticast mode
[ 2962.395408] [talos] controller failed {"component": "controller-runtime", "controller": "network.LinkSpecController", "error": "1 error occurred:\n\t* error enslaving/unslaving link \"enxe69ff8d7c455\" under \"br0\": netlink receive: device or resource busy\n\n"}
[ 2962.421701] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2962.459681] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2964.466490] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 2964.478141] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-1
[ 2964.686756] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 2964.709445] dwmac4: Master AXI performs any burst length
[ 2964.715442] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: No Safety Features support found
[ 2964.725000] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: IEEE 1588-2008 Advanced Timestamp supported
[ 2964.736018] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: registered PTP clock
[ 2964.744685] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue start
[ 2964.753001] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: configuring for phy/rgmii-rxid link mode
[ 2964.790780] 8021q: adding VLAN 0 to HW filter on device enxe69ff8d7c455
[ 2964.831530] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue stop
[ 2964.839868] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2964.849901] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to kill vid 0081/0
[ 2964.859024] br0: port 1(enxe69ff8d7c455) entered blocking state
[ 2964.865673] br0: port 1(enxe69ff8d7c455) entered disabled state
[ 2964.872350] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: entered allmulticast mode
[ 2964.881396] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2964.902700] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to initialize vlan filtering on this port
[ 2964.913992] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: left allmulticast mode
[ 2964.922921] [talos] controller failed {"component": "controller-runtime", "controller": "network.LinkSpecController", "error": "1 error occurred:\n\t* error enslaving/unslaving link \"enxe69ff8d7c455\" under \"br0\": netlink receive: device or resource busy\n\n"}
[ 2964.949099] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2964.982024] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2966.333412] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 2966.345058] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-1
[ 2966.586635] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 2966.609337] dwmac4: Master AXI performs any burst length
[ 2966.615316] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: No Safety Features support found
[ 2966.624883] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: IEEE 1588-2008 Advanced Timestamp supported
[ 2966.635898] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: registered PTP clock
[ 2966.644677] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue start
[ 2966.652996] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: configuring for phy/rgmii-rxid link mode
[ 2966.690771] 8021q: adding VLAN 0 to HW filter on device enxe69ff8d7c455
[ 2966.731519] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue stop
[ 2966.739865] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2966.749900] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to kill vid 0081/0
[ 2966.759118] br0: port 1(enxe69ff8d7c455) entered blocking state
[ 2966.765774] br0: port 1(enxe69ff8d7c455) entered disabled state
[ 2966.772438] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: entered allmulticast mode
[ 2966.781487] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2966.818594] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to initialize vlan filtering on this port
[ 2966.829899] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: left allmulticast mode
[ 2966.839027] [talos] controller failed {"component": "controller-runtime", "controller": "network.LinkSpecController", "error": "1 error occurred:\n\t* error enslaving/unslaving link \"enxe69ff8d7c455\" under \"br0\": netlink receive: device or resource busy\n\n"}
[ 2966.865350] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2966.896941] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2971.763559] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 2971.775833] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Register MEM_TYPE_PAGE_POOL RxQ-1
[ 2971.986284] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 2972.006101] dwmac4: Master AXI performs any burst length
[ 2972.012106] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: No Safety Features support found
[ 2972.021731] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: IEEE 1588-2008 Advanced Timestamp supported
[ 2972.032796] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: registered PTP clock
[ 2972.041512] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue start
[ 2972.049856] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: configuring for phy/rgmii-rxid link mode
[ 2972.086504] 8021q: adding VLAN 0 to HW filter on device enxe69ff8d7c455
[ 2972.125073] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: FPE workqueue stop
[ 2972.133392] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2972.143429] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to kill vid 0081/0
[ 2972.155160] br0: port 1(enxe69ff8d7c455) entered blocking state
[ 2972.161822] br0: port 1(enxe69ff8d7c455) entered disabled state
[ 2972.168488] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: entered allmulticast mode
[ 2972.177532] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: Timeout accessing MAC_VLAN_Tag_Filter
[ 2972.206253] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: failed to initialize vlan filtering on this port
[ 2972.217538] rk_gmac-dwmac fe1c0000.ethernet enxe69ff8d7c455: left allmulticast mode
[ 2972.226422] [talos] controller failed {"component": "controller-runtime", "controller": "network.LinkSpecController", "error": "1 error occurred:\n\t* error enslaving/unslaving link \"enxe69ff8d7c455\" under \"br0\": netlink receive: device or resource busy\n\n"}
[ 2972.252586] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}
[ 2972.284350] [talos] error querying ethtool link state {"component": "controller-runtime", "controller": "network.LinkStatusController", "link": "enxe69ff8d7c455", "error": "netlink receive: device or resource busy"}

[nberlee]

@usrbinkat You are raising a specific issue here, could you create a seperate issue on nberlee/talos if the following failed?

A minor caution, i see net.ifnames=0 in your kernel parameters, it has not been applied yet, as your interface is not eth0. The first time you run talosctl upgrade your networkdevice will be renamed to eth0 and your bridge config will fail. (as enx is part of it, not eth0)

Maybe this will work:

looking at https://lkml.org/lkml/2023/10/24/691 eee (energy efficent ethernet) needs to disabled. Which makes no sense at it is the link between the RK1 and the switchchip on the Turing Pi board. But it may be worth the try:

Before adding the bridge config: (in this example i use eth0, use your own network interface name)

$ kubectl debug node/yournodename --profile=netadmin --image=alpine -it -n kube-system
Creating debugging pod node-debugger-yournodename-wwvnc with container debugger on node yournodename.
If you don't see a command prompt, try pressing enter.
/ # apk add ethtool
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/aarch64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/aarch64/APKINDEX.tar.gz
(1/2) Installing libmnl (1.0.5-r2)
(2/2) Installing ethtool (6.6-r0)
Executing busybox-1.36.1-r15.trigger
OK: 8 MiB in 17 packages
/ # ethtool --set-eee eth0 eee off
/ # 

your container will exit as the network interface is reset.

check if it worked:

$ kubectl debug node/yournodename --profile=netadmin --image=alpine -it -n kube-system
Creating debugging pod node-debugger-yournodename-wwvnc with container debugger on node yournodename.
If you don't see a command prompt, try pressing enter.
/ # apk add ethtool
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/aarch64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/aarch64/APKINDEX.tar.gz
(1/2) Installing libmnl (1.0.5-r2)
(2/2) Installing ethtool (6.6-r0)
Executing busybox-1.36.1-r15.trigger
OK: 8 MiB in 17 packages
/ # ethtool --show-eee eth0
EEE settings for eth0:
	EEE status: disabled
	Tx LPI: disabled
	Supported EEE link modes:  100baseT/Full
	                           1000baseT/Full
	Advertised EEE link modes:  Not reported
	Link partner advertised EEE link modes:  Not reported

Then try to apply your bridge config.

Networking on the Turing took some kernel patches to make it work fine. For instance VLAN tag support and going >600Mbit. This is included in the fork, but I there may be an upstream additional patch for your bridge problem. So please open an issue if this does not work