Issues installing & configuring Predbat

[Keith-J]

I am having a nightmare trying to get Predbat up & running. I am new to HA but I am a programmer & I have worked with UNIX/Linux for over 30 years. So I have some idea what I'm doing, especially at the shell prompt.
My issues currently lie with the apps.yaml file that comes with Predbat.
There are 2 places where I feel the comments in this file could be improved.
At about line 256 in the version I have, there is an "Energy Rates" section. The section leads with a comment that starts "Please set one of these three......". In this line & the many lines lines that follow, there are no 3 obvious options to choose from? A little more explanation here would help.

Also, within the comment text a few lines below we see:
"NOTE: To get detailed energy rates you need to go in and manually enable the following events in HA".
That might mean something to seasoned HA users, but to newbies it means nothing. Googling "Enable events in Home Assistant" doesn't help either.

I'm not asking for support. I will get the issues sorted. I just think that a few more words of help in the right place would prevent others from going through the 12 hour unsuccessful install that I have endured (so far).

I know that you are doing this development in your own time & I am grateful for your efforts.
My purpose here is to try to help by pointing out a couple of things that I feel are confusing, so that others will find configuration easier in future.

[gcoan]

Thanks for the feedback, it's only through people saying what's clear and what needs more explanation can we make improvements!

If you are using Octopus as your supplier then using the Octopus integration is by far the easiest way to go.
The other options for manual config of the rates in apps.yaml is always an option, but probably mainly for use by people not supplied by Octopus.

The Octopus integration changed recently and made the setup for use with Predbat a bit more complex.

To enable the events...

Once the octopus integration is installed and configured with your octopus account api key, go to Integrations, Choose Octopus, then Entities
You should note get a list of entities (and events) supplied by the octopus integration
Click the downwards arrow on the right hand side and make sure all the options are selected
Then in the search box, left hand side, type "current_day", click on the first event that comes up, check the name is the right one, click the cog wheel, then you should see the option to enable the event

Repeat for the other events

I'll look to add to the docs, but please feedback other experiences you have on setting up predbat

[Keith-J]

Hi Geoffrey Thanks you for the amazingly fast reply! I am using Octopus Agile, & I am keen to get batpred up & running as I have been manually controlling charging for many months. Agile is saving me a lot of money, but the time overhead is starting to wear me down. You comments below helped me to get the entities enabled. Those few words could help others, especially those who are still unsure about entities & events. My confusion around the “Energy rates” section of the apps.yaml file still applies. When you say “set one of these three…..” I really can’t see 3 obvious options to choose from? I can see all of the lines below & but I can’t easily see 3 options. I guess I’m completely misunderstanding what’s being asked? Maybe start & end markers in the comments to delimit the options might help? Where in all those lines are the 3 options? # event.octopus_energy_electricity_xxxxxxxx_previous_day_rates # event.octopus_energy_electricity_xxxxxxxx_current_day_rates # event.octopus_energy_electricity_xxxxxxxx_next_day_rates # and if you have export enable: # event.octopus_energy_electricity_xxxxxxxx_export_previous_day_rates # event.octopus_energy_electricity_xxxxxxxx_export_current_day_rates # event.octopus_energy_electricity_xxxxxxxx_export_next_day_rates # Predbat will automatically find the event. entities from the link below to the sensors metric_octopus_import: 're:(sensor.(octopus_energy_|)electricity_[0-9a-z]+_[0-9a-z]+_current_rate)' metric_octopus_export: 're:(sensor.(octopus_energy_|)electricity_[0-9a-z]+_[0-9a-z]+_export_current_rate)' # Standing charge in pounds, can be set to a sensor or manually entered (e.g. 0.50 is 50p) # The default below will pick up the standing charge from the Octopus Plugin # The standing charge only impacts the cost graphs and doesn't change the way Predbat plans # If you don't want to show the standing charge then just delete this line or set to zero metric_standing_charge: 're:(sensor.(octopus_energy_|)electricity_[0-9a-z]+_[0-9a-z]+_current_standing_charge)' # Or set your actual rates across time for import and export # If start/end is missing it's assumed to be a fixed rate # Gaps are filled with zero rate #rates_import: # - start: "00:30:00" # end: "04:30:00" # rate: 7.5 # - start: "04:30:00" # end: "00:30:00" # rate: 40.0 # #rates_export: # - rate: 4.2 # Can be used instead of the plugin to get import rates directly online # Overrides metric_octopus_import and rates_import # rates_import_octopus_url : "https://api.octopus.energy/v1/products/FLUX-IMPORT-23-02-14/electricity-tariffs/E-1R-FLUX-IMPORT-23- # rates_import_octopus_url : "https://api.octopus.energy/v1/products/AGILE-FLEX-BB-23-02-08/electricity-tariffs/E-1R-AGILE-FLEX-BB # Overrides metric_octopus_export and rates_export # rates_export_octopus_url: "https://api.octopus.energy/v1/products/FLUX-EXPORT-BB-23-02-14/electricity-tariffs/E-1R-FLUX-EXPORT-B # rates_export_octopus_url: "https://api.octopus.energy/v1/products/AGILE-OUTGOING-BB-23-02-28/electricity-tariffs/E-1R-AGILE-OUTG # rates_export_octopus_url: "https://api.octopus.energy/v1/products/OUTGOING-FIX-12M-BB-23-02-09/electricity-tariffs/E-1R-OUTGOING # Import rates can be overridden with rate_import_override # Export rates can be overridden with rate_export_override # Use the same format as above, but a date can be included if it just applies for a set day (e.g. Octopus power ups) # This will override even the Octopus plugin rates if enabled # #rates_import_override: # - date: '2023-09-10' # start: '14:00:00' # end: '14:30:00' # rate: 5 Thank you again for you quick response. Please don’t feel you need to answer this. I’m just giving feedback. Regards Keith From: Geoffrey Coan ***@***.***> Sent: Wednesday, December 27, 2023 3:24 PM To: springfall2008/batpred ***@***.***> Cc: Keith-J ***@***.***>; Author ***@***.***> Subject: Re: [springfall2008/batpred] Issues installing & configuring Predbat (Issue #539) Thanks for the feedback, it's only through people saying what's clear and what needs more explanation can we make improvements! If you are using Octopus as your supplier then using the Octopus integration is by far the easiest way to go. The other options for manual config of the rates in apps.yaml is always an option, but probably mainly for use by people not supplied by Octopus. The Octopus integration changed recently and made the setup for use with Predbat a bit more complex. To enable the events... Once the octopus integration is installed and configured with your octopus account api key, go to Integrations, Choose Octopus, then Entities You should note get a list of entities (and events) supplied by the octopus integration Click the downwards arrow on the right hand side and make sure all the options are selected Then in the search box, left hand side, type "current_day", click on the first event that comes up, check the name is the right one, click the cog wheel, then you should see the option to enable the event Repeat for the other events I'll look to add to the docs, but please feedback other experiences you have on setting up predbat — Reply to this email directly, <#539 (comment)> view it on GitHub, or <https://github.com/notifications/unsubscribe-auth/AQOHORO2IV5IKPRPMKKAV5LYLQ4SJAVCNFSM6AAAAABBEOAFVKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNZQGQYDGOJWGA> unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

[gcoan]

Hi @Keith-J I've started improving the installation instructions further, fresh pair of eyes and all that.

So far I've made changes to the main installation instructions, you can see my draft at https://github.com/gcoan/batpred/blob/main/docs/install.md

Let me know what you think, if there's anything key missing.

I plan to add the details of the 'please set one of these three' to the Energy Rates and the apps.yaml file, also need to expand the output-data a bit more.
I'll look at those things tomorrow.

Cheers Geoffrey

[Keith-J]

Hi Geoffrey I have had a quick read through & the documentation looks excellent. There are just a couple of things I noticed. 1. I remember seeing "apps_dir" instead of "app_dir" in the previous version. Whilst this has been corrected in the important place, there are a couple of other places where "apps_dir" is mentioned. A simple search & replace will sort this. 2. I come from a UNIX background. So, to me, it's important to use a leading "/" when specifying an absolute path. There are a number of places where the document shows paths to files or folders in the "/congfig" or "/addon_configs" folders where the leading "/" is missing. However, whenever the "/homeassistant" folder is shown, it has the leading "/". I think all absolute paths should have the leading slash for consistency. Also, people copy & pasting the paths will hit problems unless they are in the root folder to start with. Thank you for letting me read through this. I hope my minor comments help. FYI, I now have batpred up & running in monitor mode🙂. However, my Solar panels are not currently in the configuration. See below. I see that support for SolarEdge is in development. I have a SolarEdge PV system and a GivEnergy battery system. So I have 2 inverters, one for PV & one for the battery. This was not due to any particular requirements on my part. This is just what our supplier installed back in 2021. I guess the supplier must have sold this configuration to other customers, so it's probably not unique. I would love to help with the batpred SolarEdge integration, if my set up is not too niche? Best regards Keith ⁣Get BlueMail for Android ​

…

On 27 Dec 2023, 8:27 pm, at 8:27 pm, Geoffrey Coan ***@***.***> wrote: Hi @Keith-J I've started improving the installation instructions further, fresh pair of eyes and all that. So far I've made changes to the main installation instructions, you can see my draft at https://github.com/gcoan/batpred/blob/main/docs/install.md Let me know what you think, if there's anything key missing. I plan to add the details of the 'please set one of these three' to the Energy Rates and the apps.yaml file, also need to expand the output-data a bit more. I'll look at those things tomorrow. Cheers Geoffrey -- Reply to this email directly or view it on GitHub: #539 (comment) You are receiving this because you were mentioned. Message ID: ***@***.***>

[gcoan]

Hi Keith, thanks for the feedback. I too have a Unix background (going right back to Bell Labs Unix in fact!). I've updated the install.md page to correct the unix paths and double check the spelling of app_dir (and apps.yaml which also had apps.yml in a few places). I had corrected a couple of entries already as you'd seen, hopefully all on this page now done.

Will get onto further doc pages later on.

Your solar edge/givenergy inverter setup. To clarify, do you have a solar edge DC to AC inverter for PV generation and then an AC-coupled GivEnergy inverter with batteries?
Or do you have a hybrid GivEnergy inverter with its own panels (and batteries) as well as the Solar Edge inverter?

There'll be a way of getting the two to work with predbat for sure.

[Keith-J]

Hi Geoffrey Based on a diagram I lifted from the internet, this is what I currently have. I’ll have a play around with the config files when I get a chance to see if I can make it work. Regards Keith From: Geoffrey Coan ***@***.***> Sent: Thursday, December 28, 2023 11:56 AM To: springfall2008/batpred ***@***.***> Cc: Keith-J ***@***.***>; Mention ***@***.***> Subject: Re: [springfall2008/batpred] Issues installing & configuring Predbat (Issue #539) Hi Keith, thanks for the feedback. I too have a Unix background (going right back to Bell Labs Unix in fact!). I've updated the install.md page to correct the unix paths and double check the spelling of app_dir (and apps.yaml which also had apps.yml in a few places). I had corrected a couple of entries already as you'd seen, hopefully all on this page now done. Will get onto further doc pages later on. Your solar edge/givenergy inverter setup. To clarify, do you have a solar edge DC to AC inverter for PV generation and then an AC-coupled GivEnergy inverter with batteries? Or do you have a hybrid GivEnergy inverter with its own panels (and batteries) as well as the Solar Edge inverter? There'll be a way of getting the two to work with predbat for sure. — Reply to this email directly, view it on GitHub <#539 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AQOHORIPDTJCAKFLE47WO2TYLVM4XAVCNFSM6AAAAABBEOAFVKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNZRGA4TOMRZGU> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[gcoan]

Hi Keith, the diagram didn't come through, sorry.
I've noticed this before that pictures attached to emails don't work into GitHub, you have to upload them directly in github (either website or the github app).
If you can try again. Do you have a sensor giving the pv generation?
Geoffrey

[Keith-J]

Hi Geoffrey Sorry about the image. Basically I have a SolarEdge 5kW inverter for PV. The GivEnergy inverter is 3kW & is just for the battery. For Solar to charge the battery, it has to pass through 2 inverters. Effectively, 2 standalone systems. I do have both my own sensor and the SolarEdge sensors for PV generation monitoring. All are available in HA, so I should be able to experiment with the config. Regards Keith ⁣Get BlueMail for Android ​

…

On 28 Dec 2023, 3:23 pm, at 3:23 pm, Geoffrey Coan ***@***.***> wrote: Hi Keith, the diagram didn't come through, sorry. I've noticed this before that pictures attached to emails don't work into GitHub, you have to upload them directly in github (either website or the github app). If you can try again. Do you have a sensor giving the pv generation? Geoffrey -- Reply to this email directly or view it on GitHub: #539 (comment) You are receiving this because you were mentioned. Message ID: ***@***.***>

[springfall2008]

So I think this will work just fine, set your inverter hybrid to off, and your inverter limit to 5kw.

[gcoan]

As Trefor says, this should work, you have an AC coupled inverter. The GivEnergy template apps.yaml should give most of what you need, but I suggest you change pv_today to point to the sensor that's giving your SolarEdge PV output today in kW.

That way predbat will be able to adjust the in-day plan based on solar actuals not just the Solcast daily prediction. Useful in the summer !

I have just finished updating the Energy Rates page of the documentation to better explain the different options and ways to configure the Energy Rates into predbat. I've tried to structure it to be more logical and to guide new users through more clearly.
https://github.com/gcoan/batpred/blob/main/docs/energy-rates.md

I will (later on) update apps.yaml to align and explain the "3 options" - which are the Octopus Energy integration, Octopus rates URL or Rate Bands. They are all covered in this doc page now

Cheers

[Keith-J]

Hi Geoffrey I’ve had a skim through “energy-rates.md”. It looks a lot clearer to me now, although I have to say, I was looking more at the comments in the apps.yaml file when I was having issues with the energy rates configuration. I have a couple of comments which I have put in the attached document. I hope this attachment works this time. As a complete beginner in HA, just saying “ Go to Integrations”, didn’t immediately make sense to me. I didn’t know if this was in HACS (which has an integrations page), AppDaemon, general settings or something new. Just adding a clue for us newbies I think helps. I have added some text & highlighted it. There’s a section about clicking a down arrow, which doesn’t make sense to me. I’m not sure what you’re trying to do here. I have added a highlighted comment & a screenshot. All of my comments are in the attached doc. FYI, by following the document, I can see that all of my required Octopus entities are enabled, so I’m all good. If any of my comments are silly, please ignore them. I’m still trying to grope my way around HA😊. Regards Keith From: Geoffrey Coan ***@***.***> Sent: Thursday, December 28, 2023 10:23 PM To: springfall2008/batpred ***@***.***> Cc: Keith-J ***@***.***>; Mention ***@***.***> Subject: Re: [springfall2008/batpred] Issues installing & configuring Predbat (Issue #539) As Trefor says, this should work, you have an AC coupled inverter. The GivEnergy template apps.yaml should give most of what you need, but I suggest you change pv_today to point to the sensor that's giving your SolarEdge PV output today in kW. That way predbat will be able to adjust the in-day plan based on solar actuals not just the Solcast daily prediction. Useful in the summer ! I have just finished updating the Energy Rates page of the documentation to better explain the different options and ways to configure the Energy Rates into predbat. I've tried to structure it to be more logical and to guide new users through more clearly. https://github.com/gcoan/batpred/blob/main/docs/energy-rates.md I will (later on) update apps.yaml to align and explain the "3 options" - which are the Octopus Energy integration, Octopus rates URL or Rate Bands. They are all covered in this doc page now Cheers — Reply to this email directly, view it on GitHub <#539 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AQOHOROVP76XAYOYE2J23WDYLXWMLAVCNFSM6AAAAABBEOAFVKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNZRGU3DGMRYGA> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[gcoan]

Hi Keith
Unfortunately the attached file got stripped out. I think this happens if you email responses to github. If you can login to github and upload the file as part of a comment on the issue, I will be able to see it.

Thanks for the feedback. Trying to get the balance right in terms of level of detail, don't want to end up with a home assistant tutorial!

I've started work on the apps.yaml configuration document, done about half of it so far - same directory.

Cheers Geoffrey

[Keith-J]

Hi Geoffrey
Hopefully you can see the attachment now?
batpred-comments1.odt
HomePVSetup.odt

Best regards

Keith