Build OpenWrt using GitHub Actions
经测试编译成功。科学插件编译不进去，国内使用没问题。 去掉上传到奶牛等网络空间，直接把编译文件显示在Actions任务下面。（这个可以上传到Releases下）。
具体修改/.github/workflows/build-openwrt-newifi-y1.yml
- UPLOAD_BIN_DIR: false ---- 上传bin文件 true：上传，false：不上传；
- UPLOAD_FIRMWARE: true ---- 上传固件 true：上传，false：不上传；
- UPLOAD_RELEASE: false ---- 上传Releas true：上传，false：不上传；
这三个至少有一个等于true。
- newifi-y1.sh 固件的一些默认配置和插件的原地址或依赖地址；
- newifi.config 定制自己需要插件或功能的开启。内容可以从
simple.config这个文件里摘出来，如：需要启动磁盘管理，需要把CONFIG_PACKAGE_luci-app-diskman is not set改为CONFIG_PACKAGE_luci-app-diskman=y
下面这三个是根据硬件设备来选择的，自己百度你的设备型号。
- CONFIG_TARGET_ramips=y
- CONFIG_TARGET_ramips_mt7620=y
- CONFIG_TARGET_ramips_mt7620_DEVICE_lenovo_newifi-y1=y
Y包含此插件M编译为ipk包 即：模块N不包含此插件
如：luci-app-diskman 这个磁盘管理插件，如果需要编译到固件里则为：CONFIG_PACKAGE_luci-app-diskman=y ，如果编译成模块另外独立安装则为：CONFIG_PACKAGE_luci-app-diskman=m,如果不需要此模块则在此模块行前面加#号或者在配置文件里不出现此行记录即删除即可。
- Click the Use this template button to create a new repository.
- Generate
.configfiles using Lean's OpenWrt source code. ( You can change it through environment variables in the workflow file. ) - Push
.configfile to the GitHub repository. - Select
Build OpenWrton the Actions page. - Click the
Run workflowbutton. - When the build is complete, click the
Artifactsbutton in the upper right corner of the Actions page to download the binaries.
- It may take a long time to create a
.configfile and build the OpenWrt firmware. Thus, before create repository to build your own firmware, you may check out if others have already built it which meet your needs by simply searchActions-Openwrtin GitHub. - Add some meta info of your built firmware (such as firmware architecture and installed packages) to your repository introduction, this will save others' time.