_TZE200_3towulqd TS0601 Tuya Motion Sensor with illuminance sensor

[itsolon]

Hello, the device is possible to connect to ZHA integration
but then it is not really recognized

the device is bought from here:
https://de.aliexpress.com/item/1005004294995498.html?spm=a2g0o.productlist.0.0.7cff2ed9XwpAXp&algo_pvid=c25e2c8c-63d9-4cea-bb0c-5f190d010c75&aem_p4p_detail=202206032153431297942660195650067651185&algo_exp_id=c25e2c8c-63d9-4cea-bb0c-5f190d010c75-55&pdp_ext_f=%7B%22sku_id%22%3A%2212000028662981700%22%7D&pdp_npi=2%40dis%21EUR%21%2111.38%21%21%21%21%21%400b0a01f816543184230937794e1339%2112000028662981700%21sea

Device signature

{
  "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)",
  "endpoints": {
    "1": {
      "profile_id": 260,
      "device_type": "0x0402",
      "in_clusters": [
        "0x0000",
        "0x0001",
        "0x0500"
      ],
      "out_clusters": [
        "0x000a",
        "0x0019"
      ]
    }
  },
  "manufacturer": "_TZE200_3towulqd",
  "model": "TS0601",
  "class": "zigpy.device.Device"
}

Don't remove the extra line breaks outside the ``` marks.

Diagnostic information

{
  "home_assistant": {
    "installation_type": "Home Assistant OS",
    "version": "2022.6.1",
    "dev": false,
    "hassio": true,
    "virtualenv": false,
    "python_version": "3.9.12",
    "docker": true,
    "arch": "x86_64",
    "timezone": "Europe/Berlin",
    "os_name": "Linux",
    "os_version": "5.15.41",
    "supervisor": "2022.05.3",
    "host_os": "Home Assistant OS 8.1",
    "docker_version": "20.10.14",
    "chassis": "vm",
    "run_as_root": true
  },
  "custom_components": {
    "ecowitt": {
      "version": "0.7",
      "requirements": [
        "pyecowitt==0.14"
      ]
    },
    "frigate": {
      "version": "2.3",
      "requirements": []
    },
    "hacs": {
      "version": "1.25.5",
      "requirements": [
        "aiogithubapi>=22.2.4"
      ]
    },
    "sonoff": {
      "version": "3.0.5",
      "requirements": [
        "pycryptodome>=3.6.6"
      ]
    },
    "alarmo": {
      "version": "v1.9.3",
      "requirements": []
    },
    "remote_homeassistant": {
      "version": "3.6",
      "requirements": []
    },
    "ble_monitor": {
      "version": "8.8.0",
      "requirements": [
        "pycryptodomex>=3.14.1",
        "janus>=1.0.0",
        "aioblescan>=0.2.12",
        "btsocket>=0.2.0",
        "pyric>=0.1.6.3"
      ]
    }
  },
  "integration_manifest": {
    "domain": "zha",
    "name": "Zigbee Home Automation",
    "config_flow": true,
    "documentation": "https://www.home-assistant.io/integrations/zha",
    "requirements": [
      "bellows==0.30.0",
      "pyserial==3.5",
      "pyserial-asyncio==0.6",
      "zha-quirks==0.0.75",
      "zigpy-deconz==0.16.0",
      "zigpy==0.45.1",
      "zigpy-xbee==0.14.0",
      "zigpy-zigate==0.7.4",
      "zigpy-znp==0.7.0"
    ],
    "usb": [
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*2652*",
        "known_devices": [
          "slae.sh cc2652rb stick"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*sonoff*plus*",
        "known_devices": [
          "sonoff zigbee dongle plus"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*tubeszb*",
        "known_devices": [
          "TubesZB Coordinator"
        ]
      },
      {
        "vid": "1A86",
        "pid": "7523",
        "description": "*tubeszb*",
        "known_devices": [
          "TubesZB Coordinator"
        ]
      },
      {
        "vid": "1A86",
        "pid": "7523",
        "description": "*zigstar*",
        "known_devices": [
          "ZigStar Coordinators"
        ]
      },
      {
        "vid": "1CF1",
        "pid": "0030",
        "description": "*conbee*",
        "known_devices": [
          "Conbee II"
        ]
      },
      {
        "vid": "10C4",
        "pid": "8A2A",
        "description": "*zigbee*",
        "known_devices": [
          "Nortek HUSBZB-1"
        ]
      },
      {
        "vid": "0403",
        "pid": "6015",
        "description": "*zigate*",
        "known_devices": [
          "ZiGate+"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*zigate*",
        "known_devices": [
          "ZiGate"
        ]
      },
      {
        "vid": "10C4",
        "pid": "8B34",
        "description": "*bv 2010/10*",
        "known_devices": [
          "Bitron Video AV2010/10"
        ]
      }
    ],
    "codeowners": [
      "@dmulcahey",
      "@adminiuga"
    ],
    "zeroconf": [
      {
        "type": "_esphomelib._tcp.local.",
        "name": "tube*"
      },
      {
        "type": "_zigate-zigbee-gateway._tcp.local.",
        "name": "*zigate*"
      }
    ],
    "after_dependencies": [
      "usb",
      "zeroconf"
    ],
    "iot_class": "local_polling",
    "loggers": [
      "aiosqlite",
      "bellows",
      "crccheck",
      "pure_pcapy3",
      "zhaquirks",
      "zigpy",
      "zigpy_deconz",
      "zigpy_xbee",
      "zigpy_zigate",
      "zigpy_znp"
    ],
    "is_built_in": true
  },
  "data": {
    "ieee": "**REDACTED**",
    "nwk": 46235,
    "manufacturer": "_TZE200_3towulqd",
    "model": "TS0601",
    "name": "_TZE200_3towulqd TS0601",
    "quirk_applied": false,
    "quirk_class": "zigpy.device.Device",
    "manufacturer_code": 4417,
    "power_source": "Battery or Unknown",
    "lqi": 18,
    "rssi": null,
    "last_seen": "2022-06-03T19:40:04",
    "available": true,
    "device_type": "EndDevice",
    "signature": {
      "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)",
      "endpoints": {
        "1": {
          "profile_id": 260,
          "device_type": "0x0402",
          "in_clusters": [
            "0x0000",
            "0x0001",
            "0x0500"
          ],
          "out_clusters": [
            "0x000a",
            "0x0019"
          ]
        }
      }
    },
    "entities": [
      {
        "entity_id": "binary_sensor.tze200_3towulqd_ts0601_5bc87feb_ias_zone",
        "name": "_TZE200_3towulqd TS0601"
      },
      {
        "entity_id": "sensor.tze200_3towulqd_ts0601_5bc87feb_power",
        "name": "_TZE200_3towulqd TS0601"
      }
    ],
    "neighbors": [],
    "endpoint_names": [
      {
        "name": "IAS_ZONE"
      }
    ],
    "user_given_name": null,
    "device_reg_id": "c2fdfe7937f3ebd26c55aef21bd6cda7",
    "area_id": "diele"
  }
}
``

</details>

<details>
<summary>Additional logs</summary>

</details>
![Tuya-2-in-1-Zigbee-Mini-PIR-Motion-Bewegung-Menschlichen-K-rper-Detektor-Helligkeit-Leuchtdichte-Sensor jpg_Q90 jpg_](https://user-images.githubusercontent.com/10437947/171983923-ae98c69e-3f83-4cad-a7f7-5c028696490b.png)

[javicalle]

Most implementation extracted from the info in:

• [New device support]: ZG-204ZL / TS0601 _TZE200_3towulqd / PIR sensor with illuminance Koenkk/zigbee2mqtt#12364
• https://github.com/Koenkk/zigbee-herdsman-converters/pull/4219/files

Proposed quirk:

ts0601_pirmotion.py

"""BlitzWolf IS-3/Tuya motion rechargeable occupancy sensor."""

import math
from typing import Dict

from zigpy.profiles import zha
from zigpy.quirks import CustomDevice
import zigpy.types as t
from zigpy.zcl.clusters.general import Basic, Ota, Time
from zigpy.zcl.clusters.measurement import IlluminanceMeasurement, OccupancySensing
from zigpy.zcl.clusters.security import IasZone

from zhaquirks.const import (
    DEVICE_TYPE,
    ENDPOINTS,
    INPUT_CLUSTERS,
    MODELS_INFO,
    OUTPUT_CLUSTERS,
    PROFILE_ID,
)
from zhaquirks.tuya import TuyaLocalCluster
from zhaquirks.tuya.mcu import (
    DPToAttributeMapping,
    TuyaDPType,
    TuyaMCUCluster,
    TuyaPowerConfigurationCluster,
)

class TuyaOccupancySensing(OccupancySensing, TuyaLocalCluster):
    """Tuya local OccupancySensing cluster."""


class TuyaIlluminanceMeasurement(IlluminanceMeasurement, TuyaLocalCluster):
    """Tuya local IlluminanceMeasurement cluster."""


class SensitivityLevel(t.enum8):
    """Sensitivity level enum."""

    LOW = 0x00
    MEDIUM = 0x01
    HIGH = 0x02


class OnTimeValues(t.enum8):
    """Sensitivity level enum."""

    _10_SEC = 0x00
    _30_SEC = 0x01
    _60_SEC = 0x02
    _120_SEC = 0x03


class PirMotionManufCluster(TuyaMCUCluster):
    """Neo manufacturer cluster."""

    attributes = TuyaMCUCluster.attributes.copy()
    attributes.update({0xEF09: ("sensitivity_level", SensitivityLevel)})
    attributes.update({0xEF0A: ("keep_time", OnTimeValues)})

    dp_to_attribute: Dict[int, DPToAttributeMapping] = {
        1: DPToAttributeMapping(
            TuyaOccupancySensing.ep_attribute,
            "occupancy",
            dp_type=TuyaDPType.BOOL,
        ),
        4: DPToAttributeMapping(
            TuyaPowerConfigurationCluster.ep_attribute,
            "battery_percentage_remaining",
            dp_type=TuyaDPType.VALUE,
        ),
        9: DPToAttributeMapping(
            TuyaMCUCluster.ep_attribute,
            "sensitivity_level",
            dp_type=TuyaDPType.ENUM,
            converter=lambda x: SensitivityLevel(x),
        ),
        10: DPToAttributeMapping(
            TuyaMCUCluster.ep_attribute,
            "keep_time",
            dp_type=TuyaDPType.ENUM,
            converter=lambda x: OnTimeValues(x),
        ),
        12: DPToAttributeMapping(
            TuyaIlluminanceMeasurement.ep_attribute,
            "measured_value",
            dp_type=TuyaDPType.VALUE,
            converter=lambda x: 10000 * math.log10(x + 1),
        ),
    }

    data_point_handlers = {
        1: "_dp_2_attr_update",
        4: "_dp_2_attr_update",
        9: "_dp_2_attr_update",
        10: "_dp_2_attr_update",
        12: "_dp_2_attr_update",
    }


class PirMotion(CustomDevice):
    """Tuya PIR motion sensor."""

    signature = {
        MODELS_INFO: [("_TZE200_3towulqd", "TS0601")],
        ENDPOINTS: {
            # endpoints=1 profile=260 device_type=0x0402
            # in_clusters=[0x0000, 0x0001, 0x0500],
            # out_clusters=[0x000a, 0x0019]
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.IAS_ZONE,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    TuyaPowerConfigurationCluster.cluster_id,
                    IasZone.cluster_id,
                ],
                OUTPUT_CLUSTERS: [
                    Time.cluster_id,
                    Ota.cluster_id,
                ],
            }
        },
    }

    replacement = {
        ENDPOINTS: {
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.IAS_ZONE,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    TuyaPowerConfigurationCluster,
                    PirMotionManufCluster,
                    TuyaOccupancySensing,
                    TuyaIlluminanceMeasurement,
                ],
                OUTPUT_CLUSTERS: [
                    Time.cluster_id,
                    Ota.cluster_id,
                ],
            }
        }
    }

The device is a low power device and reading/setting values can be difficult:

• https://github.com/jaspernlp/zigbee2mqtt.io/blob/master/docs/devices/ZG-204ZL.md#reading-and-setting-values

[itsolon]

Thank you for your answer, but i do not really know what to do with this code..
i assume i should copy it into a file and upload it to HA?
but i already have TS601 switch you wrote a quirk for me already ..
the question is.. how do i know if i can remove that "hand made quirks" because its now in HA zha integration itself?
Best regards Markus

[javicalle]

One approach is just configure a zha local quirk folder. This is a guide of the steps to follow:

• Editing (ZHA) quirks in a (HA) container or local. #693 (comment)

Copy the propposed file in the local folder and restart. If everything is fine, the device signature will change and maybe some new entities will show up in HA.

[itsolon]

ok. it seems that every device i buy at the moment is ts0601 and additionally has issues.

i made file but corrected from ts0601_swicth.py to ts0601_switch.py

and copied your suggest into that file. after restart

{
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)",
"endpoints": {
"1": {
"profile_id": 260,
"device_type": "0x0402",
"in_clusters": [
"0x0000",
"0x0001",
"0xef00"
],
"out_clusters": [
"0x000a",
"0x0019"
]
}
},
"manufacturer": "_TZE200_3towulqd",
"model": "TS0601",
"class": "ts0601_switch.PirMotion"
}

good news.. the battery with 100% is reporting.
but no entities movement or brightness :-(

{
"home_assistant": {
"installation_type": "Home Assistant OS",
"version": "2022.6.2",
"dev": false,
"hassio": true,
"virtualenv": false,
"python_version": "3.9.12",
"docker": true,
"arch": "x86_64",
"timezone": "Europe/Berlin",
"os_name": "Linux",
"os_version": "5.15.41",
"supervisor": "2022.05.3",
"host_os": "Home Assistant OS 8.1",
"docker_version": "20.10.14",
"chassis": "vm",
"run_as_root": true
},
"custom_components": {
"ecowitt": {
"version": "0.7",
"requirements": [
"pyecowitt==0.14"
]
},
"frigate": {
"version": "2.3",
"requirements": []
},
"hacs": {
"version": "1.25.5",
"requirements": [
"aiogithubapi>=22.2.4"
]
},
"sonoff": {
"version": "3.0.5",
"requirements": [
"pycryptodome>=3.6.6"
]
},
"alarmo": {
"version": "v1.9.4",
"requirements": []
},
"remote_homeassistant": {
"version": "3.6",
"requirements": []
},
"ble_monitor": {
"version": "8.8.0",
"requirements": [
"pycryptodomex>=3.14.1",
"janus>=1.0.0",
"aioblescan>=0.2.12",
"btsocket>=0.2.0",
"pyric>=0.1.6.3"
]
}
},
"integration_manifest": {
"domain": "zha",
"name": "Zigbee Home Automation",
"config_flow": true,
"documentation": "https://www.home-assistant.io/integrations/zha",
"requirements": [
"bellows==0.30.0",
"pyserial==3.5",
"pyserial-asyncio==0.6",
"zha-quirks==0.0.75",
"zigpy-deconz==0.16.0",
"zigpy==0.45.1",
"zigpy-xbee==0.14.0",
"zigpy-zigate==0.7.4",
"zigpy-znp==0.7.0"
],
"usb": [
{
"vid": "10C4",
"pid": "EA60",
"description": "2652",
"known_devices": [
"slae.sh cc2652rb stick"
]
},
{
"vid": "10C4",
"pid": "EA60",
"description": "sonoffplus*",
"known_devices": [
"sonoff zigbee dongle plus"
]
},
{
"vid": "10C4",
"pid": "EA60",
"description": "tubeszb",
"known_devices": [
"TubesZB Coordinator"
]
},
{
"vid": "1A86",
"pid": "7523",
"description": "tubeszb",
"known_devices": [
"TubesZB Coordinator"
]
},
{
"vid": "1A86",
"pid": "7523",
"description": "zigstar",
"known_devices": [
"ZigStar Coordinators"
]
},
{
"vid": "1CF1",
"pid": "0030",
"description": "conbee",
"known_devices": [
"Conbee II"
]
},
{
"vid": "10C4",
"pid": "8A2A",
"description": "zigbee",
"known_devices": [
"Nortek HUSBZB-1"
]
},
{
"vid": "0403",
"pid": "6015",
"description": "zigate",
"known_devices": [
"ZiGate+"
]
},
{
"vid": "10C4",
"pid": "EA60",
"description": "zigate",
"known_devices": [
"ZiGate"
]
},
{
"vid": "10C4",
"pid": "8B34",
"description": "bv 2010/10",
"known_devices": [
"Bitron Video AV2010/10"
]
}
],
"codeowners": [
"@dmulcahey",
"@Adminiuga"
],
"zeroconf": [
{
"type": "_esphomelib._tcp.local.",
"name": "tube*"
},
{
"type": "_zigate-zigbee-gateway._tcp.local.",
"name": "zigate"
}
],
"after_dependencies": [
"usb",
"zeroconf"
],
"iot_class": "local_polling",
"loggers": [
"aiosqlite",
"bellows",
"crccheck",
"pure_pcapy3",
"zhaquirks",
"zigpy",
"zigpy_deconz",
"zigpy_xbee",
"zigpy_zigate",
"zigpy_znp"
],
"is_built_in": true
},
"data": {
"ieee": "REDACTED",
"nwk": 10480,
"manufacturer": "_TZE200_3towulqd",
"model": "TS0601",
"name": "_TZE200_3towulqd TS0601",
"quirk_applied": true,
"quirk_class": "ts0601_switch.PirMotion",
"manufacturer_code": 4417,
"power_source": "Battery or Unknown",
"lqi": 40,
"rssi": null,
"last_seen": "2022-06-06T11:03:06",
"available": true,
"device_type": "EndDevice",
"signature": {
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)",
"endpoints": {
"1": {
"profile_id": 260,
"device_type": "0x0402",
"in_clusters": [
"0x0000",
"0x0001",
"0xef00"
],
"out_clusters": [
"0x000a",
"0x0019"
]
}
}
},
"entities": [
{
"entity_id": "sensor.galerie_bewegung_power",
"name": "_TZE200_3towulqd TS0601"
}
],
"neighbors": [],
"endpoint_names": [
{
"name": "IAS_ZONE"
}
],
"user_given_name": "Galerie Bewegung",
"device_reg_id": "7410af9d59c022ac8863daf829516868",
"area_id": "galerie"
}
}

[javicalle]

Is the 'normal' behaviour for most of the Tuya devices (not only yours). If you don't like troubles I would suggest you that avoid them.

The device is loading the quirk, but maybe the DP mapping is not good. Please, enable the debug logs and attach the relevant info (formatted inside ``` please). For enabling the logs:
https://www.home-assistant.io/integrations/zha/#debug-logging

corrected from ts0601_swicth.py to ts0601_switch.py

Ouch 😅

[itsolon]

Hi i could successfully activate logs. but dont know how to filter the relevant info for you..
the log is so big
only zigpy interesting?

[javicalle]

Usually looking at the logs while interacting with the device and copying the generated logs.
There's not an easy way to do.

I'm not sure in this case, but with some devices you can look for the device identifier, the most right left number (456789 1234) from [1234:1:456789] in the logs.

[itsolon]

hi, javicalle, i have installed new intance with few modules.. for test and enabled logging.
for your interest here you can see everything

Device log extracted

2022-06-13 18:48:53 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=87, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\xaa\x02\x00\x00', *payload=682)))
2022-06-13 18:48:53 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=37, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:48:53 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:48:53 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=37, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x25\x0B\x02\x81')
2022-06-13 18:48:53 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:48:53 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=37)
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=153, SecurityUse=<Bool.false: 0>, TimeStamp=2117896, TSN=0, Data=b'\x09\x26\x02\x00\x58\x01\x04\x00\x01\x01', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x26\x02\x00\x58\x01\x04\x00\x01\x01'
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=38, command_id=2, *is_reply=True)
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=88, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x01', *payload=<enum8.undefined_0x01: 1>)))
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 38): set_data_response(data=TuyaCommand(status=0, tsn=88, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x01', *payload=<enum8.undefined_0x01: 1>)))
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=88, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x01', *payload=<enum8.undefined_0x01: 1>))
2022-06-13 18:48:54 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=88, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x01', *payload=<enum8.undefined_0x01: 1>)))
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=38, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=38, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x26\x0B\x02\x81')
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:48:54 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=38)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Sending request: SYS.Ping.Req()
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Received command: SYS.Ping.Rsp(Capabilities=<MTCapabilities.APP_CNF|GP|UTIL|ZDO|AF|SYS: 1625>)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=153, SecurityUse=<Bool.false: 0>, TimeStamp=2211875, TSN=0, Data=b'\x09\x27\x02\x00\x59\x0C\x02\x00\x04\x00\x00\x02\xAA', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x27\x02\x00\x59\x0C\x02\x00\x04\x00\x00\x02\xAA'
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=39, command_id=2, *is_reply=True)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=89, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\xaa\x02\x00\x00', *payload=682)))
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 39): set_data_response(data=TuyaCommand(status=0, tsn=89, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\xaa\x02\x00\x00', *payload=682)))
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=89, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\xaa\x02\x00\x00', *payload=682))
2022-06-13 18:48:55 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=89, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\xaa\x02\x00\x00', *payload=682)))
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=39, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=39, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x27\x0B\x02\x81')
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=39)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=149, SecurityUse=<Bool.false: 0>, TimeStamp=2225736, TSN=0, Data=b'\x09\x28\x02\x00\x5A\x01\x04\x00\x01\x00', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x28\x02\x00\x5A\x01\x04\x00\x01\x00'
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=40, command_id=2, *is_reply=True)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=90, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x00', *payload=<enum8.undefined_0x00: 0>)))
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 40): set_data_response(data=TuyaCommand(status=0, tsn=90, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x00', *payload=<enum8.undefined_0x00: 0>)))
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=90, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x00', *payload=<enum8.undefined_0x00: 0>))
2022-06-13 18:48:55 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=90, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x00', *payload=<enum8.undefined_0x00: 0>)))
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=40, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=40, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x28\x0B\x02\x81')
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:48:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=40)
2022-06-13 18:49:08 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=153, SecurityUse=<Bool.false: 0>, TimeStamp=3054932, TSN=0, Data=b'\x09\x29\x02\x00\x5B\x0C\x02\x00\x04\x00\x00\x02\x92', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:49:08 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x29\x02\x00\x5B\x0C\x02\x00\x04\x00\x00\x02\x92'
2022-06-13 18:49:08 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=41, command_id=2, *is_reply=True)
2022-06-13 18:49:09 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=91, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\x92\x02\x00\x00', *payload=658)))
2022-06-13 18:49:09 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 41): set_data_response(data=TuyaCommand(status=0, tsn=91, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\x92\x02\x00\x00', *payload=658)))
2022-06-13 18:49:09 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=91, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\x92\x02\x00\x00', *payload=658))
2022-06-13 18:49:09 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=91, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\x92\x02\x00\x00', *payload=658)))
2022-06-13 18:49:09 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=41, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:49:09 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:49:09 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=41, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x29\x0B\x02\x81')
2022-06-13 18:49:09 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:49:09 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=41)
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=123, SecurityUse=<Bool.false: 0>, TimeStamp=3812443, TSN=0, Data=b'\x09\x2A\x02\x00\x5C\x0C\x02\x00\x04\x00\x00\x02\x62', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x2A\x02\x00\x5C\x0C\x02\x00\x04\x00\x00\x02\x62'
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=42, command_id=2, *is_reply=True)
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=92, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'b\x02\x00\x00', *payload=610)))
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 42): set_data_response(data=TuyaCommand(status=0, tsn=92, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'b\x02\x00\x00', *payload=610)))
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=92, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'b\x02\x00\x00', *payload=610))
2022-06-13 18:49:21 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=92, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'b\x02\x00\x00', *payload=610)))
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=42, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=42, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x2A\x0B\x02\x81')
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:49:21 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=42)
2022-06-13 18:49:25 DEBUG (MainThread) [zigpy_znp.api] Sending request: SYS.Ping.Req()
2022-06-13 18:49:25 DEBUG (MainThread) [zigpy_znp.api] Received command: SYS.Ping.Rsp(Capabilities=<MTCapabilities.APP_CNF|GP|UTIL|ZDO|AF|SYS: 1625>)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=94, SecurityUse=<Bool.false: 0>, TimeStamp=4941751, TSN=0, Data=b'\x09\x2B\x02\x00\x5D\x0C\x02\x00\x04\x00\x00\x00\x0B', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x2B\x02\x00\x5D\x0C\x02\x00\x04\x00\x00\x00\x0B'
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=43, command_id=2, *is_reply=True)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=93, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\x0b\x00\x00\x00', *payload=11)))
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 43): set_data_response(data=TuyaCommand(status=0, tsn=93, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\x0b\x00\x00\x00', *payload=11)))
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=93, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\x0b\x00\x00\x00', *payload=11))
2022-06-13 18:49:39 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=93, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\x0b\x00\x00\x00', *payload=11)))
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=43, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=43, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x2B\x0B\x02\x81')
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=43)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=94, SecurityUse=<Bool.false: 0>, TimeStamp=4955974, TSN=0, Data=b'\x09\x2C\x02\x00\x5E\x01\x04\x00\x01\x01', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x2C\x02\x00\x5E\x01\x04\x00\x01\x01'
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=44, command_id=2, *is_reply=True)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=94, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x01', *payload=<enum8.undefined_0x01: 1>)))
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 44): set_data_response(data=TuyaCommand(status=0, tsn=94, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x01', *payload=<enum8.undefined_0x01: 1>)))
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=94, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x01', *payload=<enum8.undefined_0x01: 1>))
2022-06-13 18:49:39 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=94, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x01', *payload=<enum8.undefined_0x01: 1>)))
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=44, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=44, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x2C\x0B\x02\x81')
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:49:39 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=44)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=87, SecurityUse=<Bool.false: 0>, TimeStamp=5140770, TSN=0, Data=b'\x09\x2D\x02\x00\x5F\x0C\x02\x00\x04\x00\x00\x00\x41', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x2D\x02\x00\x5F\x0C\x02\x00\x04\x00\x00\x00\x41'
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=45, command_id=2, *is_reply=True)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=95, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'A\x00\x00\x00', *payload=65)))
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 45): set_data_response(data=TuyaCommand(status=0, tsn=95, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'A\x00\x00\x00', *payload=65)))
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=95, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'A\x00\x00\x00', *payload=65))
2022-06-13 18:49:42 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=95, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'A\x00\x00\x00', *payload=65)))
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=45, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=45, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x2D\x0B\x02\x81')
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=45)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=98, SecurityUse=<Bool.false: 0>, TimeStamp=5154531, TSN=0, Data=b'\x09\x2E\x02\x00\x60\x01\x04\x00\x01\x00', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x2E\x02\x00\x60\x01\x04\x00\x01\x00'
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=46, command_id=2, *is_reply=True)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=96, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x00', *payload=<enum8.undefined_0x00: 0>)))
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 46): set_data_response(data=TuyaCommand(status=0, tsn=96, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x00', *payload=<enum8.undefined_0x00: 0>)))
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=96, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x00', *payload=<enum8.undefined_0x00: 0>))
2022-06-13 18:49:42 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=96, dp=1, data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, function=0, raw=b'\x00', *payload=<enum8.undefined_0x00: 0>)))
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=46, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=46, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x2E\x0B\x02\x81')
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:49:42 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=46)
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=61184, SrcAddr=0x4269, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=80, SecurityUse=<Bool.false: 0>, TimeStamp=5825100, TSN=0, Data=b'\x09\x2F\x02\x00\x61\x0C\x02\x00\x04\x00\x00\x02\xDA', MacSrcAddr=0x4269, MsgResultRadius=29)
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received ZCL frame: b'\x09\x2F\x02\x00\x61\x0C\x02\x00\x04\x00\x00\x02\xDA'
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.CLUSTER_COMMAND: 1>, is_manufacturer_specific=0, is_reply=1, disable_default_response=0, reserved=0, *is_cluster=True, *is_general=False), tsn=47, command_id=2, *is_reply=True)
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Decoded ZCL frame: PirMotionManufCluster:set_data_response(data=TuyaCommand(status=0, tsn=97, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\xda\x02\x00\x00', *payload=730)))
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Received command 0x02 (TSN 47): set_data_response(data=TuyaCommand(status=0, tsn=97, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\xda\x02\x00\x00', *payload=730)))
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No datapoint handler for TuyaCommand(status=0, tsn=97, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\xda\x02\x00\x00', *payload=730))
2022-06-13 18:49:53 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] No 'handle_set_data_response' tuya handler found for set_data_response(data=TuyaCommand(status=0, tsn=97, dp=12, data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, function=0, raw=b'\xda\x02\x00\x00', *payload=730)))
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply header: ZCLHeader(frame_control=FrameControl(frame_type=<FrameType.GLOBAL_COMMAND: 0>, is_manufacturer_specific=False, is_reply=1, disable_default_response=1, reserved=0, *is_cluster=False, *is_general=True), tsn=47, command_id=<GeneralCommand.Default_Response: 11>, *is_reply=True)
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy.zcl] [0x4269:1:0xef00] Sending reply: Default_Response(command_id=2, status=<Status.UNSUP_CLUSTER_COMMAND: 129>)
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0x4269), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=61184, TSN=47, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK: 32>, Radius=30, Data=b'\x18\x2F\x0B\x02\x81')
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2022-06-13 18:49:53 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=47)
2022-06-13 18:49:55 DEBUG (MainThread) [zigpy_znp.api] Sending request: SYS.Ping.Req()
2022-06-13 18:49:55 DEBUG (MainThread) [zigpy_znp.api] Received command: SYS.Ping.Rsp(Capabilities=<MTCapabilities.APP_CNF|GP|UTIL|ZDO|AF|SYS: 1625>)

Device signature

{
  "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)",
  "endpoints": {
    "1": {
      "profile_id": 260,
      "device_type": "0x0402",
      "in_clusters": [
        "0x0000",
        "0x0001",
        "0xef00"
      ],
      "out_clusters": [
        "0x000a",
        "0x0019"
      ]
    }
  },
  "manufacturer": "_TZE200_3towulqd",
  "model": "TS0601",
  "class": "ts0601_switch.PirMotion"
}

Diagnostic information

{
  "home_assistant": {
    "installation_type": "Home Assistant OS",
    "version": "2022.6.5",
    "dev": false,
    "hassio": true,
    "virtualenv": false,
    "python_version": "3.9.12",
    "docker": true,
    "arch": "x86_64",
    "timezone": "Europe/Berlin",
    "os_name": "Linux",
    "os_version": "5.15.41",
    "supervisor": "2022.05.3",
    "host_os": "Home Assistant OS 8.1",
    "docker_version": "20.10.14",
    "chassis": "vm",
    "run_as_root": true
  },
  "custom_components": {
    "ble_monitor": {
      "version": "8.8.1",
      "requirements": [
        "pycryptodomex>=3.14.1",
        "janus>=1.0.0",
        "aioblescan>=0.2.12",
        "btsocket>=0.2.0",
        "pyric>=0.1.6.3"
      ]
    },
    "remote_homeassistant": {
      "version": "3.6",
      "requirements": []
    },
    "hacs": {
      "version": "1.25.5",
      "requirements": [
        "aiogithubapi>=22.2.4"
      ]
    }
  },
  "integration_manifest": {
    "domain": "zha",
    "name": "Zigbee Home Automation",
    "config_flow": true,
    "documentation": "https://www.home-assistant.io/integrations/zha",
    "requirements": [
      "bellows==0.30.0",
      "pyserial==3.5",
      "pyserial-asyncio==0.6",
      "zha-quirks==0.0.75",
      "zigpy-deconz==0.16.0",
      "zigpy==0.45.1",
      "zigpy-xbee==0.14.0",
      "zigpy-zigate==0.7.4",
      "zigpy-znp==0.7.0"
    ],
    "usb": [
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*2652*",
        "known_devices": [
          "slae.sh cc2652rb stick"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*sonoff*plus*",
        "known_devices": [
          "sonoff zigbee dongle plus"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*tubeszb*",
        "known_devices": [
          "TubesZB Coordinator"
        ]
      },
      {
        "vid": "1A86",
        "pid": "7523",
        "description": "*tubeszb*",
        "known_devices": [
          "TubesZB Coordinator"
        ]
      },
      {
        "vid": "1A86",
        "pid": "7523",
        "description": "*zigstar*",
        "known_devices": [
          "ZigStar Coordinators"
        ]
      },
      {
        "vid": "1CF1",
        "pid": "0030",
        "description": "*conbee*",
        "known_devices": [
          "Conbee II"
        ]
      },
      {
        "vid": "10C4",
        "pid": "8A2A",
        "description": "*zigbee*",
        "known_devices": [
          "Nortek HUSBZB-1"
        ]
      },
      {
        "vid": "0403",
        "pid": "6015",
        "description": "*zigate*",
        "known_devices": [
          "ZiGate+"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*zigate*",
        "known_devices": [
          "ZiGate"
        ]
      },
      {
        "vid": "10C4",
        "pid": "8B34",
        "description": "*bv 2010/10*",
        "known_devices": [
          "Bitron Video AV2010/10"
        ]
      }
    ],
    "codeowners": [
      "@dmulcahey",
      "@adminiuga"
    ],
    "zeroconf": [
      {
        "type": "_esphomelib._tcp.local.",
        "name": "tube*"
      },
      {
        "type": "_zigate-zigbee-gateway._tcp.local.",
        "name": "*zigate*"
      }
    ],
    "after_dependencies": [
      "usb",
      "zeroconf"
    ],
    "iot_class": "local_polling",
    "loggers": [
      "aiosqlite",
      "bellows",
      "crccheck",
      "pure_pcapy3",
      "zhaquirks",
      "zigpy",
      "zigpy_deconz",
      "zigpy_xbee",
      "zigpy_zigate",
      "zigpy_znp"
    ],
    "is_built_in": true
  },
  "data": {
    "ieee": "**REDACTED**",
    "nwk": 17001,
    "manufacturer": "_TZE200_3towulqd",
    "model": "TS0601",
    "name": "_TZE200_3towulqd TS0601",
    "quirk_applied": true,
    "quirk_class": "ts0601_switch.PirMotion",
    "manufacturer_code": 4417,
    "power_source": "Battery or Unknown",
    "lqi": 94,
    "rssi": null,
    "last_seen": "2022-06-13T18:58:09",
    "available": true,
    "device_type": "EndDevice",
    "signature": {
      "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4417, maximum_buffer_size=66, maximum_incoming_transfer_size=66, server_mask=10752, maximum_outgoing_transfer_size=66, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)",
      "endpoints": {
        "1": {
          "profile_id": 260,
          "device_type": "0x0402",
          "in_clusters": [
            "0x0000",
            "0x0001",
            "0xef00"
          ],
          "out_clusters": [
            "0x000a",
            "0x0019"
          ]
        }
      }
    },
    "entities": [
      {
        "entity_id": "sensor.tze200_3towulqd_ts0601_51c662cb_power",
        "name": "_TZE200_3towulqd TS0601"
      }
    ],
    "neighbors": [],
    "endpoint_names": [
      {
        "name": "IAS_ZONE"
      }
    ],
    "user_given_name": null,
    "device_reg_id": "792a6da6e8efa645d188a045299e8e15",
    "area_id": null
  }
}

[javicalle]

The device signature is telling us that the quirk has been applied:

  "class": "ts0601_switch.PirMotion"

But logs complains that can't find the DP definition:

2022-06-13 18:48:53 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] 
  No 'handle_set_data_response' tuya handler found for set_data_response(
    data=TuyaCommand(
      status=0, 
      tsn=87, 
      dp=12,     <--- *
      data=TuyaData(dp_type=<TuyaDPType.VALUE: 2>, 
      function=0, 
      raw=b'\xaa\x02\x00\x00', 
      *payload=682)
    )
  )

2022-06-13 18:48:54 WARNING (MainThread) [zigpy.zcl] [0x4269:1:0xef00] 
  No 'handle_set_data_response' tuya handler found for set_data_response(
    data=TuyaCommand(
      status=0, 
      tsn=88, 
      dp=1,    <--- *
      data=TuyaData(dp_type=<TuyaDPType.ENUM: 4>, 
      function=0, 
      raw=b'\x01', 
      *payload=<enum8.undefined_0x01: 1>)
    )
  )

@itsolon, I have updated the replacement part of the quirk, can you test the new version?:

    replacement = {
        ENDPOINTS: {
            1: {
                PROFILE_ID: zha.PROFILE_ID,
                DEVICE_TYPE: zha.DeviceType.IAS_ZONE,
                INPUT_CLUSTERS: [
                    Basic.cluster_id,
                    TuyaPowerConfigurationCluster,
                    PirMotionManufCluster,
                    TuyaOccupancySensing,
                    TuyaIlluminanceMeasurement,
                ],
                OUTPUT_CLUSTERS: [
                    Time.cluster_id,
                    Ota.cluster_id,
                ],
            }
        }
    }

[itsolon]

yes i will please give me 20 min

[itsolon]

[itsolon]

maybe the missing entity is old and can be removed? it seems the occupancy reports very fast