Fix building issue of Nuvoton porting.

bsp/nuvoton/libraries/m031/rtt_port/SConscript

@@ -10,4 +10,3 @@ CPPPATH = [cwd]
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/libraries/m2354/rtt_port/SConscript

@@ -21,4 +21,3 @@ else:
     group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/libraries/m460/rtt_port/SConscript

@@ -43,4 +43,3 @@ for d in list:
 objs += group
 
 Return('objs')
-')

bsp/nuvoton/libraries/m480/rtt_port/SConscript

@@ -33,4 +33,3 @@ else:
     group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/libraries/ma35/libcpu/arm/cortex-m4/SConscript

@@ -1,7 +1,7 @@
 # RT-Thread building script for component
 
-Import('RTT_ROOT')
 from building import *
+Import('RTT_ROOT')
 
 cwd     = GetCurrentDir()
 src = Glob('*.c') + Glob('*.cpp')
@@ -11,5 +11,4 @@ group = []
 # USB driver constrain
 group = DefineGroup('CPU', src, depend = [''], CPPPATH = CPPPATH)
 
-Return('group')
-')
+Return('group')

bsp/nuvoton/libraries/ma35/rtt_port/SConscript

@@ -19,4 +19,3 @@ for d in list:
 objs += group
 
 Return('objs')
-')

bsp/nuvoton/libraries/n9h30/rtt_port/SConscript

@@ -19,4 +19,3 @@ for d in list:
 objs += group
 
 Return('objs')
-')

bsp/nuvoton/libraries/nuc980/rtt_port/SConscript

@@ -12,4 +12,3 @@ group = []
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/ma35-rtp/board/SConscript

@@ -16,4 +16,3 @@ CPPPATH = [cwd, cwd + '/nutool_pincfg']
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 
 Return('group')
-')

bsp/nuvoton/nk-980iot/.config

@@ -57,6 +57,7 @@ CONFIG_RT_USING_SIGNALS=y
 #
 # Memory Management
 #
+CONFIG_RT_PAGE_MAX_ORDER=11
 CONFIG_RT_USING_MEMPOOL=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
@@ -98,7 +99,7 @@ CONFIG_ARCH_ARM_ARM9=y
 CONFIG_RT_USING_COMPONENTS_INIT=y
 CONFIG_RT_USING_USER_MAIN=y
 CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
-CONFIG_RT_MAIN_THREAD_PRIORITY=10
+CONFIG_RT_MAIN_THREAD_PRIORITY=20
 # CONFIG_RT_USING_LEGACY is not set
 CONFIG_RT_USING_MSH=y
 CONFIG_RT_USING_FINSH=y
@@ -171,6 +172,7 @@ CONFIG_RT_CAN_USING_HDR=y
 # CONFIG_RT_CAN_USING_CANFD is not set
 CONFIG_RT_USING_HWTIMER=y
 CONFIG_RT_USING_CPUTIME=y
+CONFIG_CPUTIME_TIMER_FREQ=0
 CONFIG_RT_USING_I2C=y
 # CONFIG_RT_I2C_DEBUG is not set
 CONFIG_RT_USING_I2C_BITOPS=y
@@ -358,12 +360,12 @@ CONFIG_RT_LWIP_TCP_PCB_NUM=16
 CONFIG_RT_LWIP_TCP_SEG_NUM=64
 CONFIG_RT_LWIP_TCP_SND_BUF=16384
 CONFIG_RT_LWIP_TCP_WND=65535
-CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=10
+CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=21
 CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=256
 CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=4096
 # CONFIG_LWIP_NO_RX_THREAD is not set
-# CONFIG_LWIP_NO_TX_THREAD is not set
-CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=12
+CONFIG_LWIP_NO_TX_THREAD=y
+CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=22
 CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=4096
 CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=256
 CONFIG_RT_LWIP_REASSEMBLY_FRAG=y
@@ -373,7 +375,7 @@ CONFIG_SO_REUSE=1
 CONFIG_LWIP_SO_RCVTIMEO=1
 CONFIG_LWIP_SO_SNDTIMEO=1
 CONFIG_LWIP_SO_RCVBUF=1
-CONFIG_LWIP_SO_LINGER=0
+CONFIG_LWIP_SO_LINGER=1
 CONFIG_RT_LWIP_NETIF_LOOPBACK=y
 CONFIG_LWIP_NETIF_LOOPBACK=1
 CONFIG_RT_LWIP_STATS=y
@@ -949,6 +951,7 @@ CONFIG_PKG_OPTPARSE_VER="latest"
 # CONFIG_PKG_USING_SOEM is not set
 # CONFIG_PKG_USING_QPARAM is not set
 # CONFIG_PKG_USING_CorevMCU_CLI is not set
+# CONFIG_PKG_USING_GET_IRQ_PRIORITY is not set
 
 #
 # Arduino libraries

bsp/nuvoton/nk-980iot/board/SConscript

@@ -1,15 +1,11 @@
 # RT-Thread building script for component
 
 from building import *
-
-
 Import('RTT_ROOT')
-from building import *
 
 cwd = GetCurrentDir()
 src = Glob('*.c') + Glob('*.cpp')
 CPPPATH = [ cwd ]
 
 group = DefineGroup('board', src, depend = [''], CPPPATH = CPPPATH)
 Return('group')
-')